Panasonic VL-SW250BX operating instructions Monitoring the outside Door station monitor, Talk OFF

Page 23

Doorphone

Monitoring the outside (Door station monitor)

You can monitor the sound and image taken by the door station.

LIf an optional lobby station is connected to the main monitor station (page 4), you cannot monitor outside where the lobby station is located.

 

 

{PAGE}

 

{VOLUME}

XX

{MENU}

{▲} {▲}

 

 

 

 

 

 

 

{MONITOR}

{MONITOR}

 

 

{D}

 

 

 

 

 

 

{OFF}

{TALK}

 

 

{TALK}

{OFF}

 

 

1 Press {MONITOR}.

LThe outside image will be shown on the display, and you will hear the sound from outside. (The sound from your end will not be heard at the door station.)

LTo speak to the other party at the door station, press {TALK}.

2 To end monitoring, press {OFF}.

N When installing 2 door stations

(Example: Main monitor station)

 

 

 

 

SELECT DOOR STATION

When you press {MONITOR} in step 1, the following is displayed.

 

 

 

 

Select the desired door station:

 

DOOR STATION 1

 

 

 

: Press {VOLUME} (▲) or {PAGE} (▲), then

 

DOOR STATION 2

 

 

 

press {MENU} (OK).

 

 

 

 

 

 

 

 

:Press {▼} or {▲}, then press {D} (OK).

Note:

LMonitoring will automatically end in about 90 seconds.

LYou can perform the following operations during monitoring. For more details, see page 19.

–Scrolling an image right or left on the sub monitor station

–Adjusting the display brightness

–Hiding the operation guidance

–Adjusting the speaker volume

When using an additional door station:

LWhen you receive another call from the other door station while monitoring, see page 22.

23

SW250BX_OI.indb 23

2010/08/25 15:58:33

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Thank you for purchasing a Panasonic product Attached Installation GuideDoorphone IntroductionImportant Information PreparationVL-SW250BX Accessory informationProduct names used in these Operating Instructions Included itemsCompatible Panasonic PBXs Additional/replacement accessoriesAccessory items Order number When using with a lobby stationOperating safeguards For your safetyPower connection InstallationBattery Important safety instructionsInstallation and relocation Environment Before usingFor best performance Others Other informationTapping Privacy and rights of portraitDoor station Location of controlsMain monitor station Operation guidance Press Volume dMonitor display Main monitor station Display during operationSub monitor station Charger stand Battery coverRear view Speaker Charge contacts Metallic parts Charger Charge contactsOFF Monitor display Sub monitor stationLImages on the monitor display Back NextTo remove the charger stand Charging the sub monitor stationPad at the back To assemble the charger standVoice Changer Next Setting the date and timeVolume Voice Changer Microphone Answering a call by voice sensor Voice answer modeWhen using an additional door station Answering a callMain monitor station only Features during a call or while monitoringAdjusting the display brightness Main monitor station Adjusting the speaker volume Main monitor stationTo hear the visitor Using Door KEY buttonTo speak to the visitor Speak while pressing and holding TalkTo receive a transferred call VolumeTransferring a call To transfer a callNTo speak to the other party When answering a callMonitor Talk OFF Monitor OFF TalkMonitor When installing 2 door stationsPress Volume or page , then Monitoring the outside Door station monitorPLAY/REC NAuto image updateRecording an image Auto recordingPress D REC Manual recordingPress PLAY/REC NTo view the next image Viewing recorded images using the main monitor stationVoice Changer Menu Volume OFF Menu Menu Voice Changer BackMenu Pause Menu PlayNTo view a series of 8 continuous images Viewing recorded images using the sub monitor stationButton and guidance Operation Back Image statusTo release protection Volume MenuProtecting the recorded images SelectMenu OFF Press Volume YESErasing an image You can erase unnecessary imagesOFF Talk Volume Menu OFFCaller Receiver Adjusting the ringer volume Sound Sound 1 REPEAT*1 Sound 2 REPEAT*1 Sound 3 REPEAT*1 Changing the ringer toneMain monitor station Sub monitor station Ringer tone patternsPress Menu OK, then select the desired item by pressing Setting Door KEY buttonPress Menu OK, then select Door KEY by pressing Volume or Volume orTime and Date How to change the function settingsItem function Setting Function list of the main monitor stationPICTURES, 1 Picture NORMAL, LOWExternal Device Terminal 2 SIGNALS, 2 Terminals 1 SignalLobby Demo Mode REGISTRATION/CANCELLATION Registration CancellationStation Ring Volume Door HIGH, MEDIUM, LOW, OFFFunction list of the sub monitor station Contrast Init Settings YES, noVoice Answer ON, OFF Disp REC Date ALWAYS, 3 SECSub monitor station*1 Door station*1 Main monitor station Expanding your system with optional unitsPlease use only a Panasonic PBX Units required to be installed Adding a door stationUsing with Panasonic PBX Operating the door openerAdding a sub monitor station Registration Using the main monitor stationUsing the sub monitor station To register a canceled sub monitor station page 46 againProgram Setting a repeater RegistrationTo power outlet 100 240 V AC Status indicatorCancellation Canceling registration of the sub monitor station/repeaterAway from those appliances. Try again TroubleshootingMonitor display Problem Cause & Solution Ringer tone Problem Cause & Solution Problem Cause & SolutionConversation Doorphone/Intercom Problem Cause & Solution Remove the battery and insert it again Sub monitor station/Battery Problem Cause & SolutionOthers Problem Cause & Solution Help Sub monitor station only Problem Cause & Solution Error messagesBattery replacement CleaningDoor station VL-V566BX SpecificationsMain monitor station VL-MW250BX Sub monitor station VL-W605BXLcontrast Lregistration Function SettingsLring Volume Lring Tone Lvoice Answer Lvoice Changer Lplay Lamp FlashingLoutgoing VOL Attach your sales receipt here For your future reference
Top Page Image Contents