Expanding the System
Setting a repeater (REGISTRATION)
You can set up to 2 optional repeaters (page 4).
LOne repeater can relay radio waves between the main monitor station and multiple sub monitor stations.
LIf you set a repeater between the main monitor station and sub monitor stations located at a distance, the repeater expands the radio wave range and may improve image distortion and/or sound cutting in and out.
Perform the following operations to register the repeater to the main monitor station, then install the repeater according to the Operating Instructions included with the repeater.
Registering the repeater to the main monitor station (REGISTRATION)
Place the repeater near the main monitor station and then operate the repeater within 2 minutes in succession to the operations of the main monitor station.
Using the repeater
To power outlet (100 – 240 V AC)
IN | USE |
|
|
| (LED) |
| |
|
| STATUS | |
|
|
|
PROGRAM
PROGRAM
{PROGRAM}
STATUS indicator
6 While the power is on, press and hold {PROGRAM} for about 3 seconds.
LThe STATUS indicator flashes in green.
LAfter completing the registration, the indicator lights up solid.
7 To end the operation, press {OFF} on the main monitor station.
Important:
LIf you register two repeaters, please separate them more than 3 meters to avoid electrical noise.
45
2010/08/25 15:58:38