Panasonic VL-SW250BX For your safety, Power connection, Installation, Operating safeguards

Page 5

Important Information

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit.

WARNING

Power connection

LUse only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

LUse only the specified AC adaptor.

LDo not place objects on the power cord. Install the unit where no one can step or trip on the cord.

LDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

LCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

LRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

LUnplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.

LNever touch the plug with wet hands. Danger of electric shock exists.

Installation

LTo prevent the risk of fire or electrical shock, do not expose the product (excluding the door station) to rain or any type of moisture.

LDo not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

LDo not allow the AC adaptor or power cord to be excessively pulled, bent or placed under heavy objects.

Operating safeguards

LTo reduce the risk of electric shock, do not disassemble this unit. Refer servicing to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.

LDo not touch the main monitor station and the AC adaptor/power plug during an electrical storm. There may be a remote risk of electric shock from lightning.

LNever push any objects through slots in this unit. This may result in the risk of fire or electric shock. Never spill any liquid on the unit.

LUnplug this unit from power outlets and refer servicing to an authorized service center when the following conditions occur:

A. If the power cord is damaged or frayed.

B. If metal objects have been dropped inside the main monitor station.

C. If the main monitor station or the sub monitor station has been exposed to rain or water, or liquid has been spilled into the unit. Do not use a microwave oven to speed up the drying process of any parts of the unit to avoid permanent damage.

D. If the unit has been dropped or physically damaged.

Medical

LConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 2.4 GHz to 2.48 GHz, and the power output level can range from 0.03 W to 0.175 W.)

LDo not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

5

SW250BX_OI.indb 5

2010/08/25 15:58:27

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Thank you for purchasing a Panasonic product Attached Installation GuideImportant Information IntroductionPreparation DoorphoneProduct names used in these Operating Instructions Accessory informationIncluded items VL-SW250BXAccessory items Order number Additional/replacement accessoriesWhen using with a lobby station Compatible Panasonic PBXsPower connection For your safetyInstallation Operating safeguardsBattery Important safety instructionsInstallation and relocation Environment Before usingFor best performance Tapping Other informationPrivacy and rights of portrait OthersDoor station Location of controlsMain monitor station Monitor display Main monitor station Press Volume dDisplay during operation Operation guidanceSub monitor station Rear view Speaker Charge contacts Metallic parts Charger Battery coverCharge contacts Charger standOFF Monitor display Sub monitor stationLImages on the monitor display Back NextPad at the back Charging the sub monitor stationTo assemble the charger stand To remove the charger standVoice Changer Next Setting the date and timeVolume Voice Changer When using an additional door station Answering a call by voice sensor Voice answer modeAnswering a call MicrophoneAdjusting the display brightness Main monitor station Features during a call or while monitoringAdjusting the speaker volume Main monitor station Main monitor station onlyTo speak to the visitor Using Door KEY buttonSpeak while pressing and holding Talk To hear the visitorTransferring a call VolumeTo transfer a call To receive a transferred callMonitor Talk OFF When answering a callMonitor OFF Talk NTo speak to the other partyPress Volume or page , then When installing 2 door stationsMonitoring the outside Door station monitor MonitorRecording an image NAuto image updateAuto recording PLAY/RECPress D REC Manual recordingPress PLAY/REC NTo view the next image Viewing recorded images using the main monitor stationVoice Changer Menu Volume OFF Menu Pause Voice Changer BackMenu Play Menu MenuNTo view a series of 8 continuous images Viewing recorded images using the sub monitor stationButton and guidance Operation Back Image statusProtecting the recorded images Volume MenuSelect To release protectionErasing an image Press Volume YESYou can erase unnecessary images Menu OFFOFF Talk Volume Menu OFFCaller Receiver Adjusting the ringer volume Main monitor station Sub monitor station Changing the ringer toneRinger tone patterns Sound Sound 1 REPEAT*1 Sound 2 REPEAT*1 Sound 3 REPEAT*1Press Menu OK, then select Door KEY by pressing Volume or Setting Door KEY buttonVolume or Press Menu OK, then select the desired item by pressingItem function Setting How to change the function settingsFunction list of the main monitor station Time and DatePICTURES, 1 Picture NORMAL, LOWExternal Device Terminal 2 SIGNALS, 2 Terminals 1 SignalLobby Demo Mode REGISTRATION/CANCELLATION Registration CancellationStation Ring Volume Door HIGH, MEDIUM, LOW, OFFFunction list of the sub monitor station Voice Answer ON, OFF Init Settings YES, noDisp REC Date ALWAYS, 3 SEC ContrastSub monitor station*1 Door station*1 Main monitor station Expanding your system with optional unitsUsing with Panasonic PBX Units required to be installed Adding a door stationOperating the door opener Please use only a Panasonic PBXUsing the sub monitor station Using the main monitor stationTo register a canceled sub monitor station page 46 again Adding a sub monitor station RegistrationTo power outlet 100 240 V AC Setting a repeater RegistrationStatus indicator ProgramCancellation Canceling registration of the sub monitor station/repeaterAway from those appliances. Try again TroubleshootingMonitor display Problem Cause & Solution Ringer tone Problem Cause & Solution Problem Cause & SolutionConversation Doorphone/Intercom Problem Cause & Solution Remove the battery and insert it again Sub monitor station/Battery Problem Cause & SolutionOthers Problem Cause & Solution Help Sub monitor station only Problem Cause & Solution Error messagesBattery replacement CleaningMain monitor station VL-MW250BX SpecificationsSub monitor station VL-W605BX Door station VL-V566BXLring Volume Lring Tone Function SettingsLvoice Answer Lvoice Changer Lplay Lamp Flashing Lcontrast LregistrationLoutgoing VOL Attach your sales receipt here For your future reference
Top Page Image Contents