Panasonic VL-SW250BX Monitor display Main monitor station, Display during operation

Preparation

Monitor display (Main monitor station)

The following display is an example for description purposes, and it may differ from the actual display.

LThe monitor display is turned off during standby.

<Display during operation>

A B C D E

F

N Operation guidance

A Indicates which door station or sub monitor station is calling, monitoring, or in a call. Also indicates which door station took the image while viewing it.

(Example)

: Door station 1

: Sub monitor station 1

BIndicates which door station is calling while talking or monitoring (page 22).

(Example)

: Door station 2

C : Indicates the voice changer mode is on (page 19).

: Indicates that one of the PBX extensions connected to the main monitor station is being used for a call from the door station.

D Indicates an image is being taken by the door station.

E Indicates that the “Press-to-talk” mode is on (page 20).

F Indicates that the door is opened when the door opener (sold separately) is connected to the main monitor station (page 20).

Available functions are shown on the bottom of the display. Press the appropriate button for the operation. LThe display varies depending on the operation.

Example: When setting a function

Press the button for the function directly above it.

Example: To operate “d”, press {VOLUME}.

In these Operating Instructions, the button and function displayed above are indicated as follows.

Press {VOLUME} (d).

The displayed function is not stated when the corresponding button name means the same as the displayed function.

To hide the guidance that overlaps the image:

When the display shows images (for example, during a call and while monitoring), you can temporarily hide the guidance to easily view the whole image. (See “Hiding the operation guidance” on page 19.)

11

SW250BX_OI.indb 11

2010/08/25 15:58:28