Panasonic VL-SW250BX Lobby, External Device, Terminal 2 SIGNALS, 2 Terminals 1 Signal

Programming

How to change the function settings

{VOLUME}

Note:

XX

{PAGE}

{MENU}

{OFF}

1	Press {MENU}, then select the desired item by
	pressing {VOLUME} (▲) or {PAGE} (▲).
2	Press {MENU} (OK), then select the desired item
	by pressing {VOLUME} (▲) or {PAGE} (▲).
3	Press {MENU} (OK), then select the desired
	setting by pressing {VOLUME} (▲) or {PAGE}
	(▲).
	LIn some functions, repeat this operation
	according to the display instructions.
4	Press {MENU} (OK).
	LIf “INITIALIZE SETTINGS” is selected (page
	39), the confirmation message is displayed. To
	reset settings, press {VOLUME} (YES).
5	To end the setting, press {OFF}.

LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen automatically quits.

Function list of the main monitor station

The default setting is indicated in bold.

Item (function)

Setting

CONNECTED DEVICE SETTINGS

DOOR STATION	DOOR STATION 1: YES, AUTO, NO
CONNECTION	DOOR STATION 2: YES, AUTO, NO
	LYou can select the setting of the door station.
	LSelect “NO” for the door station that is not in use.
LOBBY	Generally, it is unnecessary to change this setting. This is for apartment
CONNECTION	complexes. Only if an optional lobby station is connected to the main monitor
	station (page 4), change the setting to “YES”.
	YES, NO
DOOR KEY	DOOR KEY 1: 2 SEC OPEN, 3 SEC OPEN, 4 SEC OPEN, 5 SEC OPEN,
	6 SEC OPEN, 7 SEC OPEN, NOT CONNECTED
	DOOR KEY 2: 2 SEC OPEN, 3 SEC OPEN, 4 SEC OPEN, 5 SEC OPEN,
	6 SEC OPEN, 7 SEC OPEN, NOT CONNECTED
	LYou can select how long the door remains open when the door opener (sold
	separately) is connected to the main monitor station (page 35).
EXTERNAL DEVICE	It is unnecessary to change this setting. If you change the setting, the unit may
	not work properly.
	1 TERMINAL 2 SIGNALS, 2 TERMINALS 1 SIGNAL

38

SW250BX_OI.indb 38

2010/08/25 15:58:37