Call Features, 6 3-way Conferencing | Hitachi HANDYTONE-486 guide

HandyTone-486 User Manual

Grandstream Networks, Inc.

5.2.63-way Conferencing

HandyTone-496 supports 3-way conference in two styles: star code style or Bellcore style.

5.2.6.1 Star Code Style 3-way Conference

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

2.A dials *23 then C’s number then # (or wait for 4 seconds).

3.If C answers the call, then A press “flash” to bring B, C in the conference.

4.If C does not answer the call, A can press “flash” back to talk to B.

5.2.6.2 Bellcore Style 3-way Conference

Bellcore style 3-way conference is also supported. To do this, user needs to enable “Use Bell-style 3- way Conference” in FXS1 or FXS2 web configuration.

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

2.A dials C’s number then # (or wait for 4 seconds).

3.If C answers the call, then A press “flash” to bring B, C in the conference.

4.If C does not answer the call, A can press “flash” back to talk to B.

5.2.7PSTN Pass Through/Life line

HandyTone-486 Rev. 2.0 supports PSTN pass through. User can send and receive PSTN calls with the attached analog phone.

To receive PSTN calls, simply make phone off hook when the analog phone rings.

To make a PSTN call, press the PSTN access code (*00 by default, or any number configured in web configuration page) to switch to PSTN line and get a dial tone, then dial the PSTN number.

When HandyTone-486 is out of power, it will function as a jack. User can use the same analog phone for PSTN calls.

5.3Call Features

5.3.1Call Features Table (star code)

Following table shows the call features (* code) of HandyTone-486.

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030