HandyTone-486 User Manual | Grandstream Networks, Inc. |
Following are the steps to install a HandyTone-486:
1.Connect a standard touch-tone analog telephone (or fax machine) to PHONE port.
2.Connect a PSTN telephone line to LINE port (optional).
3.Insert the Ethernet cable into the WAN port of HandyTone-486 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.)
4.Connect a PC to the LAN port of HandyTone-486.
5.Insert the power adapter into the HandyTone-486 and connect it to a wall outlet.
Please follow the instructions in section 6.2.1 to configure the HandyTone-486.
6
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
HandyTone-486
For Firmware Version
Table of Contents
Restore Factory Default Setting Glossary of Terms
Welcome
Installation
Interconnection Diagram of the HandyTone-486
Grandstream Networks, Inc
What is Included in the Package
Safety Compliances
Warranty
Key Features
Product Overview
Hardware Specification
Model HandyTone-486
Basic Operations
Get Familiar with Key Pad and Voice Prompt
Make Phone Calls
Calling phone or extension numbers
Call Waiting
Direct IP calls
Call Hold
Voice Prompt with option 47, then 192 168 000
Call Transfer
Blind Transfer
6 3-way Conferencing
Call Features
Call Features Table star code
Pstn Pass Through/Life line
FAX
LED Light Pattern Indication
Configuration Guide
Configuring HandyTone-486 through Voice Prompt
Configuring HandyTone-486 with Web Browser
Access the Web Configuration Menu
End User Configuration
Password
NAT/Bridge/DHCP Server Information & Configuration
End User
Password
PPPoE password
Web Port
Grandstream Networks, Inc
DMZ IP
Advanced User Configuration
NAT
Advanced Options
Yes if set to Yes, # will function as the Dial key
Enable Call Features
Provisioning
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Saving the Configuration Changes
Configuration through a Central Server
Rebooting the HandyTone-486 from remote
Software Upgrade
Firmware Upgrade through TFTP/HTTP
Configuration File Download
Firmware and Configuration File Prefix and Postfix
Managing Firmware and Configuration File Download
Restore Factory Default Setting
Step
Glossary of Terms
DSP
DNS
Did
Dtmf
Dhcp
Echo Cancellation
FXS
Http
NTP
IVR
MTU
OBP/SBC
SDP
Rtcp
RTP
SIP
VAD
Vlan