Hitachi HANDYTONE-486 user manual Enable Call Features

HandyTone-486 User Manual Grandstream Networks, Inc.

Enable Call Features:

No Yes (if Yes, Call Forwarding & Call-Waiting-Disable are supported locally)

Use Bell-style

3-way Conference: No Yes (if Yes, *23 will be disabled)

Disable Call-Waiting:

No Yes

Send DTMF:

DTMF Payload Type:

Send Flash Event:

Onhook Threshold: FXS Impedance:

Caller ID Scheme:

Onhook Voltage:

Polarity Reversal:

NTP Server:

Send Anonymous:

Anonymous Method:

Time to ring:

Special Feature:

Syslog Server:

	in-audio		via RTP (RFC2833)	via SIP INFO
101
	No	Yes (Flash will be sent as a DTMF event if set to Yes)
800 ms

600 Ohm (North America)

Bellcore (North America)

36V

	No	Yes	(reverse polarity upon call establishment and termination)
time.nist.gov				(URI or IP address)
	No	Yes	(caller ID will be blocked if set to Yes)
	Use From Header				Use Privacy Header
60 seconds

Standard

Syslog Level:

Session Expiration:

Min-SE:

Caller Request Timer:

Callee Request Timer:

Force Timer:

UAC Specify Refresher:

UAS Specify Refresher:

Force INVITE:

Firmware Upgrade

NONE
180	(in seconds. default 180 seconds)
90	(in seconds. default and minimum 90 seconds)

	Yes	No (Request for timer when making outbound calls)
	Yes	No (When caller supports timer but did not request one)
	Yes	No (Use timer even when remote party does not support)
	UAC		UAS		Omit (Recommended)
	UAC		UAS (When UAC did not specify refresher tag)
	Yes	No (Always refresh with INVITE instead of UPDATE)
Upgrade Via				TFTP		HTTP

27

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030