Hitachi HANDYTONE-486 user manual Password

Page 19

HandyTone-486 User Manual

Grandstream Networks, Inc.

 

 

 

 

Grandstream Device Configuration

Password

Login

All Rights Reserved Grandstream Networks, Inc. 2005

The password is case sensitive with a maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only administrator can get access to “ADVANCED SETTINGS” configuration page.

NOTE:

If you can not log into the configuration page by using the default password, please check with your VoIP service provider. Most likely, the service provider has provisioned the device and configured for you and changed the default password.

After the correct password is entered into the login screen, the embedded Web server inside the device will respond with the following BASIC SETTINGS configuration page:

Grandstream Device Configuration

End User Password:

Web Port:

IP Address:

STATUS BASIC SETTINGS ADVANCED SETTINGS

(purposely not displayed for security protection)

 

80

 

 

(default for HTTP is 80)

 

 

 

 

 

 

 

 

 

 

 

 

 

dynamically assigned via DHCP (default) or PPPoE

(will attempt PPPoE if DHCP fails and following is non-blank)

DHCP hostname:

DHCP domain:

DHCP vendor class ID:

PPPoE account ID:

PPPoE password:

Preferred DNS server: 0 . 0 . 0 . 0

statically configured as:

19

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Image 19
Contents For Firmware Version HandyTone-486Table of Contents Restore Factory Default Setting Glossary of Terms Welcome Interconnection Diagram of the HandyTone-486 InstallationGrandstream Networks, Inc Safety Compliances What is Included in the PackageWarranty Product Overview Key FeaturesModel HandyTone-486 Hardware SpecificationGet Familiar with Key Pad and Voice Prompt Basic OperationsCalling phone or extension numbers Make Phone CallsVoice Prompt with option 47, then 192 168 000 Direct IP callsCall Hold Call WaitingBlind Transfer Call TransferPstn Pass Through/Life line Call FeaturesCall Features Table star code 6 3-way ConferencingFAX LED Light Pattern Indication Configuring HandyTone-486 through Voice Prompt Configuration GuideAccess the Web Configuration Menu Configuring HandyTone-486 with Web BrowserEnd User Configuration Password NAT/Bridge/DHCP Server Information & Configuration Web Port PasswordPPPoE password End UserGrandstream Networks, Inc DMZ IP NAT Advanced User ConfigurationAdvanced Options Yes if set to Yes, # will function as the Dial key Enable Call Features Provisioning Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc Saving the Configuration Changes Rebooting the HandyTone-486 from remote Configuration through a Central ServerFirmware Upgrade through TFTP/HTTP Software UpgradeFirmware and Configuration File Prefix and Postfix Configuration File DownloadManaging Firmware and Configuration File Download Step Restore Factory Default SettingGlossary of Terms Dtmf DNSDid DSPHttp Echo CancellationFXS DhcpOBP/SBC IVRMTU NTPSIP RtcpRTP SDPVlan VAD