HandyTone-486 User Manual | Grandstream Networks, Inc. |
6Configuration Guide
6.1Configuring HandyTone-486 through Voice Prompt
6.1.1DHCP Mode
Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP.
6.1.2STATIC IP Mode
Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway, and DNS server respectively.
6.1.3Firmware Server IP Address
Follow section 5.1 with voice menu option 13 to configure the IP address of the firmware server.
6.1.4Configuration Server IP Address
Follow section 5.1 with voice menu option 14 to configure the IP address of the configuration server.
6.1.5Upgrade Protocol
Follow section 5.1 with voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.
6.1.6Firmware Upgrade Mode
Follow section 5.1 with voice menu option 17 to choose firmware upgrade mode among the following three options:
-always check
-check when pre/suffix changes
-never upgrade
6.1.7WAN Port Web Access
Follow section 5.1 with voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.
17
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
For Firmware Version
HandyTone-486
Table of Contents
Restore Factory Default Setting Glossary of Terms
Welcome
Interconnection Diagram of the HandyTone-486
Installation
Grandstream Networks, Inc
Warranty
What is Included in the Package
Safety Compliances
Product Overview
Key Features
Model HandyTone-486
Hardware Specification
Get Familiar with Key Pad and Voice Prompt
Basic Operations
Calling phone or extension numbers
Make Phone Calls
Call Hold
Direct IP calls
Call Waiting
Voice Prompt with option 47, then 192 168 000
Blind Transfer
Call Transfer
Call Features Table star code
Call Features
6 3-way Conferencing
Pstn Pass Through/Life line
FAX
LED Light Pattern Indication
Configuring HandyTone-486 through Voice Prompt
Configuration Guide
End User Configuration
Configuring HandyTone-486 with Web Browser
Access the Web Configuration Menu
Password
NAT/Bridge/DHCP Server Information & Configuration
PPPoE password
Password
End User
Web Port
Grandstream Networks, Inc
DMZ IP
NAT
Advanced User Configuration
Advanced Options
Yes if set to Yes, # will function as the Dial key
Enable Call Features
Provisioning
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Saving the Configuration Changes
Rebooting the HandyTone-486 from remote
Configuration through a Central Server
Firmware Upgrade through TFTP/HTTP
Software Upgrade
Managing Firmware and Configuration File Download
Configuration File Download
Firmware and Configuration File Prefix and Postfix
Step
Restore Factory Default Setting
Glossary of Terms
Did
DNS
DSP
Dtmf
FXS
Echo Cancellation
Dhcp
Http
MTU
IVR
NTP
OBP/SBC
RTP
Rtcp
SDP
SIP
Vlan
VAD