Grandstream Networks, Inc. |
Cloned WAN MAC |
Address: |
LAN Subnet Mask |
LAN DHCP Base IP: |
DHCP IP Lease |
Time |
DMZ IP: |
Port Forwarding: |
Allow user to set a specific MAC address. Set in Hex format.
Sets the LAN subnet mask. Default value is 255.255.255.0. If bridge mode is selected, the LAN settings have no effect.
Base IP for the LAN port, which functions as a gateway for its LAN. Default value is 192.168.2.1
The amount of time that a given IP address will be valid for a LAN client. Value is set in units of hours. Default value is 120hr (5 Days).
Forward all WAN IP traffic to a specific IP address if no matching port is used by
Allow user to forward a matching (TCP/UDP) port to a specific LAN IP address with a specific (TCP/UDP) port.
In addition to the Basic Settings configuration page, end users also have access to the device Status page. The following is a snap shot of the device Status page. Details will be explained next.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
MAC Address:
WAN IP Address:
Product Model:
Software Version:
Configuration Version:
System Up Time:
Registered:
PPPoE Link Up:
NAT:
NAT Mapped IP:
NAT Mapped Port:
Total Inbound Calls:
Total Outbound Calls:
Total Missed Calls:
Total Call Time (in minutes):
Total SIP Message Sent:
00.0B.82.03.31.D2
192.168.1.180
HT486 REV 2.0
0 day(s) 5 hour(s) 6 minute(s)
Yes
disabled
detected NAT type is port restricted cone
67.153.142.88
5060
0
0
0
0
13
23
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030