HandyTone-486 User Manual | Grandstream Networks, Inc. |
6.2Configuring HandyTone-486 with Web Browser
HandyTone-486 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the HandyTone-486 through a Web browser such as Microsoft’s IE and AOL’s Netscape.
6.2.1Access the Web Configuration Menu
HandyTone-486’s web configuration page can be accessed via LAN or WAN port:
•From the LAN port:
Directly connect a computer to the LAN port. Open a command window on the computer
Type in “ipconfig /release”, the IP address etc. become 0.0.0.0.
Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.1 by default Open a web browser, type in the default gateway IP address. You will see the login page of the device.
http://192.168.2.1
•From the WAN port:
The WAN port HTML configuration option is disabled by default from factory. To access the HTML configuration menu from the WAN port, first enable the “WAN side HTTP access” option via IVR option 12. With the WAN side HTTP access enabled, then get the WAN IP address of the HandyTone-486 through section 5.1 with menu option 02. The HandyTone-486’s Web Configuration page can be accessed by the following URI via WAN port:
http://HandyTone-IP-Address
where the HandyTone-IP-Addressis the WAN IP address of the HandyTone-486.
NOTE:
•To type IP address into browser to get into the configuration page, please strip out the leading “0”s as the browser will parse in octet. e.g.: if the IP address is: 192.168.001.014, please type in: 192.168.1.14.
6.2.2End User Configuration
Once this request is entered and sent from a Web browser, the HandyTone-486 will respond with the following login screen:
18
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
HandyTone-486
For Firmware Version
Table of Contents
Restore Factory Default Setting Glossary of Terms
Welcome
Installation
Interconnection Diagram of the HandyTone-486
Grandstream Networks, Inc
What is Included in the Package
Safety Compliances
Warranty
Key Features
Product Overview
Hardware Specification
Model HandyTone-486
Basic Operations
Get Familiar with Key Pad and Voice Prompt
Make Phone Calls
Calling phone or extension numbers
Call Waiting
Direct IP calls
Call Hold
Voice Prompt with option 47, then 192 168 000
Call Transfer
Blind Transfer
6 3-way Conferencing
Call Features
Call Features Table star code
Pstn Pass Through/Life line
FAX
LED Light Pattern Indication
Configuration Guide
Configuring HandyTone-486 through Voice Prompt
Configuring HandyTone-486 with Web Browser
Access the Web Configuration Menu
End User Configuration
Password
NAT/Bridge/DHCP Server Information & Configuration
End User
Password
PPPoE password
Web Port
Grandstream Networks, Inc
DMZ IP
Advanced User Configuration
NAT
Advanced Options
Yes if set to Yes, # will function as the Dial key
Enable Call Features
Provisioning
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Grandstream Networks, Inc
Saving the Configuration Changes
Configuration through a Central Server
Rebooting the HandyTone-486 from remote
Software Upgrade
Firmware Upgrade through TFTP/HTTP
Configuration File Download
Firmware and Configuration File Prefix and Postfix
Managing Firmware and Configuration File Download
Restore Factory Default Setting
Step
Glossary of Terms
DSP
DNS
Did
Dtmf
Dhcp
Echo Cancellation
FXS
Http
NTP
IVR
MTU
OBP/SBC
SDP
Rtcp
RTP
SIP
VAD
Vlan