Grandstream Networks, Inc. |
Automatic Upgrade
Firmware Key
Authenticate Conf File
Lock keypad update
Allow conf SIP Account
in Basic Settings
Volume
Amplification
Call Progress Tones
Default is “Yes”.
For firmware encryption. It should be 32 digit in Hexadecimal Representation. End user should keep it blank.
Default is “No”. If set to “Yes”, configuration file would be authenticated before acceptance. End user should use default setting.
If this parameter is set to “Yes”, except for IVR MENU items 1 to 5, the configuration update via keypad is disabled.
Default “No”. If set to “Yes”, user ID, authentication IP, authentication password and display name can be configured in BASIC SETTINGS page.
Handset volume adjustment. RX is for receiving volume, TX is for transmission volume. Default values are 0dB for both parameters. +6dB generates the highest volume and
Using these settings, users can configure various call progress tone frequencies and cadences according to their country standard. By default they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high pitch sounds. ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of silence. In order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms and then repeat the pattern. Up to three cadences are supported.
6.2.4Saving the Configuration Changes
Once a change is made, users should click on the “Update” button in the Configuration page. The
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2005
35
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030