Mitel 5055 manual Example of a Specific Configuration File

5055 SIP Phone User Guide (Rev. A)

Example of a Specific Configuration File

#Mitel 5055 SIP Phone Configuration File

#this file name= SXXXXXXXXXXXX.cfg

#where xxxxxxxxxxxx is the MAC address padded with 0s

#comment lines are leading with a character '#'

#no escape '\' continue lines are allowed

#the string length of the parameter must be less than 128 characters

#parameter template=

#token = parameter ; comments

########################################################################

#Configuration Begins Here

########################################################################

#System Configuration Begins Here

########################################################################

#image version

image_name= NULL

#configure the phone by the tftpserver

#choice [0-no, 1- yes, 2-always]

#if the option "always" is being chosen, everytime the phone boots up, it will download

#the configuration parameters from the TFTP server which will overwrite any static

#values of these parameters. This mode is useful for administrators to control the

#phone's settings. User can't select this option from the web interface.

#If the option "Yes" is being chosen, the phone will boot up and download the configuration

#file from the TFTP server. Therefore, the statically configured parameters, if any,

#will be overwriten by the parameters in the configuration file. After boot up, user

can

#change this parameter to "No" from web interface.

#If the option "No" is being chosen, the phone, when booting up, will

#not download the configuration file from the tftp server. The phone may only

#do a version check for the main image.

tftp_config= 0

#address type

#choice[0-IPv4 or 2-FQDN],

#when the option IPv4 is being chosen, the outgoing sip requests will use the dotted

#format of the IP address

#when the choice is FQDN, the outgoing sip requests will use the "sip:host_name.domain" format

#for the "contact" sip header. The FQDN address must be a resolvable entry in the DNS server.

addr_type= 0

#host name

#defines the host name of the sip phone.

#This parameter is used when addr_type is set to FQDN

host_name= sip1

# domain name

domain= -example.com; domain name

#tftp server ip address

#the sip phone will download the boot image, the main image, and the configuration parameters

#from this ip address

tftp= 192.168.0.1

#sntp server URL address

#the sip phone will update its date and time from this server sntp= ntp.cpsc.ucalgary.ca

#time zone

#integer [-12, 0, 12]

- 76 -