Mitel 5055 manual # e911 port number emergport=

Appendix C — Configuration Files

#2) if the above proxy_addr (domain.com) is not resolvable from the DNS server,

#this ip address will be used in place of the proxy address

outbound_ip= 192.168.0.1

#outbound server proxy port outbound_port= 5060

#sip registrar address

#could be same as or different from the proxy_addr above registrar=

#sip registrar port

registrar_port= 5060

#Registration duration in seconds for each register request

#the server may respond with a different duration

register_expire= 7200; in seconds

#Registration authentication method

#choice [0-NONE, 1-BASIC, 2-DIGEST] auth_method= 0

#sip voice mail server addresssip phone willsend the "subsrib" request for message- summary to this address

voice_mail_srv=

#auto forward to voice mail server after num of rings

voicemail_ringnum=4

#sip voice mail server port voice_srv_port= 5060

#emergency number

#integer string

#when user dials this string, the phone will send the sip request to e911_ip emerg_number= 911

#emergency ip address

#must be an ip address

emerg_ip= 192.168.0.1

#e911 port number emerg_port= 5060

##################################################################################

#Media configuration

##################################################################################

#audio codec to offer

#the codec(s) you choose here, will be listed in the INVITE or OPTION's SDP

#choice 0-g711 uLaw

#1-g711 ALaw

#2-g729A

#3-g729A and g711 uLaw

#4-all of the above codecs

audio_codec=0

#audio codec packet size

#currently this parameter is only applicable to the g711 codec

#choice [10, 20, 30] ms

audio_pkt_size= 20; ms

#dtmf type

#defines the way the DTMF digits will be sent across

#choice [0-automatic, 1-outband & inband, 2-outband only, 3-inband only

#automatic means when a "telephone-event" is being received from the peer party, send the

#DTMF digit in the outband-only mode

#

- 73 -