Mitel 5055 manual #dtmf payload96-127 dtmfpayload=

5055 SIP Phone User Guide (Rev. A)

emerg_port= 5060

##################################################################################

#Media configuration

##################################################################################

#audio codec to offer

#the codec(s) you choose here, will be listed in the INVITE or OPTION's SDP

#choice 0-g711 uLaw

#1-g711 ALaw

#2-g729A

#3-g729A and g711 uLaw

#4-all of the above codecs

audio_codec=0

#audio codec packet size

#currently this parameter is only applicable to the g711 codec

#choice [10, 20, 30] ms

audio_pkt_size= 20; ms

#dtmf type

#defines the way the DTMF digits will be sent across

#choice [0-automatic, 1-outband & inband, 2-outband only, 3-inband only

#automatic means when a "telephone-event" is being received from the peer party, send the

#DTMF digit in the outband-only mode

#

dtmf_type= 0

#dtmf payload(96-127) dtmf_payload= 96

#Media port configuration start port start_port= 8000

#Media port configuration start port end_port= 19998

##################################################################################

#feature configuration

##################################################################################

#auto answer mode

#choice [0-disabled, 1-enabled]

auto_answer= 0

#auto answer reason code

#0- in a meeting

#1- out of town

#2- at lunch

#3- on vacation

#4- in a conference

#5- in lab

#6- back in 5 minutes

#7- gone home

#8- on a course

#9- off sick

#10- other reason

reasons= 0

#other reason string

#when reasons = 10, the sip will copy this string to the "reject reason" field. other_reason= i am busy now!

#do not disturb

#choice [0 - disable, 1-enable]

#when enabled, all incoming calls will be rejected, or forwarded to the voicemail do_not_disturb= 0

#call forwarding no answer mode

#choice [0-disabled, 1- enabled]

#when enabled, the incoming call will be forwarded to the "noans_fwd_addr"

- 80 -