Mitel 5055 manual # Vlan ID

5055 SIP Phone User Guide (Rev. A)

#for the "contact" sip header. The FQDN address must be a resolvable entry in the DNS server.

addr_type= 0

#domain name

domain= -example.com; domain name

#tftp server ip address

#the sip phone will download the boot image, the main image, and the configuration parameters

#from this ip address

tftp= 192.168.0.1

#sntp server URL address

#the sip phone will update its date and time from this server sntp= ntp.cpsc.ucalgary.ca

#time zone

#integer [-12, 0, 12]

time_zone= -5; EST time #time_zone= 8; China

#tos

#integer [0, 1e] (even numbers only); tos= 0

#IEEE 802.1 priority

#integer [-1, 0, 7]

#-1 means OFF

802_priority= -1

#VLAN ID

#integer[0, 4095] vlan_id= 0

##################################################################################

#SIP configuration

##################################################################################

#sip phone will listen for the SIP packets at this port

#when the other phone calls this phone, the sip packets must be sent to this port local_sip_port= 5060

#transport protocol for sip

#this parameter can be overwriten by dialing a url with this parameter: transport= udp

#or transport = tcp

#choice [1-tcp, 2- udp]

trans_protocol= 2

#sip proxy address

#When dialing a number or user_id only, the proxy address will automatically be appended

#to the number (or id) as number@proxy or user_id@proxy

#The proxy address can be in IP address or domain.com format

proxy_addr=

#sip proxy port proxy_port= 5060

#outbound_state

#choice [0-NO, 1-YES]

#if YES, all the sip requests and responses will always be sent to the outbound_ip.

#Otherwise, the sip responses will be sent to the "via" address. The requests will be sent to

#"route" or "contact", according to the rule defined by the sip specs.

outbound_state= 0

#outbound proxy ip address

#1) if, for some reason, the sip phone must send request to a local sip proxy first,

#config this outbound sip proxy ip address

- 72 -