Mitel 5055 manual Ethernet, Auto

5055 SIP Phone User Guide (Rev. A)

Ethernet Page

For two Ethernet devices to connect, they must share the same speed setting. Most current devices are capable of negotiating compatible settings automatically, as soon as you connect them. Some older equipment does not support auto negotiation, for this equipment, you will have to use this page to select the Ethernet operating parameters manually

Figure 16 Web Configuration Tool: Ethernet Page

Table 16 Web Configuration Tool: Ethernet Settings

Setting Name	Values (bold = default)			Notes
	Auto			The Auto setting lets the 5055 SIP phone
	10	Half
				and the PC negotiate the Ethernet speed
PC port	10	Full		and duplex automatically. If the PC does not
	100		Half	support auto-negotiation, you must select a
	100		Full	compatible setting manually.
	Auto			The Auto setting lets the 5055 SIP phone
	10	Half		and the Ethernet device (hub, router, layer 2
				switch, broadband modem etc.) negotiate
LAN port	10	Full
				the Ethernet speed and duplex. If the device
	100		Half
				does not support auto-negotiation, you must
	100		Full
				select a compatible setting manually.

- 64 -