Grandstream Networks HT-286 Call Features, 38 Fax, LED Light Pattern Indication, Flash/Hook

Page 13

Call Features

The HT–286 supports all the traditional and advanced telephony features.

TABLE 6: HT–286 CALL FEATURE DEFINITIONS

Key *23 *30

*31

*50

*51

*67

*70

*71

*72

*73

*82

*87

*90

*91

*92

*93

Flash/Hook

Call Features

3-way conference

Block Caller ID (for all subsequent calls)

Send Caller ID (for all subsequent calls)

Disable Call Waiting (for all subsequent calls)

Enable Call Waiting (for all subsequent calls)

Block Caller ID (per call)

Disable Call Waiting (per call)

Enable Call Waiting (per call)

Unconditional Call Forward. Dial “*72”, wait for dial tone. Dial the forward number and “#” for a dial tone, then hang up.

Cancel Unconditional Call Forward. To cancel “Unconditional Call Forward”, dial “*73”, wait for dial tone, then hang up.

Send Caller ID (per call)

Blind Transfer

Busy Call Forward. Dial “*90” , wait for dial tone. Then dial the forward number and “#” for a dial tone, then hang up.

Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “*91”, wait for dial tone, then hang up.

Delayed Call Forward. Dial “*92”, wait for dial tone. Then dial the forward number and “#” for a dial tone, then hang up.

Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial “*93”, wait for dial tone, then hang up.

Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call.

T.38 Fax

HT–286 supports fax in two modes: 1) T.38 (Fax over IP) and 2) fax pass through.

T.38 is the preferred method because it is more reliable and works well in most network conditions. If the service provider supports T.38, please use this method by selecting T.38 as fax mode (default). If the service provider does not support T.38, pass-through mode may be used.

LED Light Pattern Indication

Following tables show the LED light pattern indication.

Grandstream Networks, Inc.

HT–286 User Manual

Page 13 of 28

 

Firmware 1.1.0.31

Last Updated: 1/2009

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Grandstream Networks, Inc Connecting the HT286 HT-286 User Manua l Welcome Button and two colors led indicator InstallationFXS port to be connected to analog phones / fax machines Three Easy Steps to Install the HT-286 Product Overview Fax over IP ProvisioningSecurity Physical DesignMain Menu Basic OperationsExamples E101E E102E E103E E104EExpected outcomes Star Code Style 3-way Conference Attended TransferBellcore Style 3-way Conference 38 Fax Call FeaturesLED Light Pattern Indication Flash/HookButton flashes every 2 seconds Button flashes every 1 secondButton flashes every 4 seconds Button flashes every 6 secondsConfiguration Guide PPPoE password End User PasswordPPPoE Service Name Web PortMAC Address Daylight Savings TimeWAN IP Address Product ModelAuthenticate ID Admin PasswordAuthenticate PasswordUnregister On Reboot Fax ModeILBC frame size ILBC payload typeRegistration Timeout Use # asExpiration Early DialDisable Call Waiting Enable Call FeatureDisable Call-Waiting NAT TraversalCaller ID Scheme Special FeaturesOnhook Voltage Polarity ReversalCallee Request Timer Caller Request TimerForce Timer Syslog LevelConfig Server Path Firmware UpgradeConfig File Prefix Config File PostfixSaving the Configuration Changes Instructions to download a free Tftp Server Software UpgradeConfiguration File Download Step Restore Factory Default Setting
Top Page Image Contents