Grandstream Networks HT-286 user manual Basic Operations, Main Menu

Basic Operations

GET FAMILIAR WITH VOICE PROMPT

HT–286 stores a voice prompt menu (Interactive Voice Response or IVR) for quick browsing and simple configuration.

Pick up the handset and press the button on the HT–286 or dial “***” to use the IVR menu.

TABLE 4: HT–286 IVR MENU DEFINITIONS

Menu

Main Menu

01

02

03

04

05

07

13

14

15

16

17

Voice Prompt

“Enter a Menu Option”

“DHCP Mode”,

“Static IP Mode”

“IP Address “ + IP address

“Subnet “ + IP address

“Gateway “ + IP address

“DNS Server “ + IP address

Preferred Vocoder

Firmware Server IP

Address

Configuration Server IP Address

Upgrade Protocol

Firmware Version

Firmware Upgrade

Options

Press “*” for the next menu option Press “#” to return to the main menu

Enter 01-05, 07,12-17,47 or 99 menu options

Press “9” to toggle the selection

If using “Static IP Mode”, configure the IP address information using menus 02 to 05.

If using “Dynamic IP Mode”, all IP address information comes from the DHCP server automatically after reboot.

The current WAN IP address is announced

If using “Static IP Mode”, enter 12 digit new IP address.

Same as menu 02

Same as menu 02

Same as menu 02

Press “9” to move to the next selection in the list:

•PCM U

•PCM A

•G.723

•G.729

•iLBC

•G.726

Announces current Firmware Server IP address. Enter 12 digit new IP address.

Announces current Config Server Path IP address. Enter 12 digit new IP address.

Upgrade protocol for firmware and configuration update. Press “9” to toggle between TFTP / HTTP

Firmware version information.

Firmware upgrade mode. Press “9” to toggle among the following three options:

-always check

-check when pre/suffix changes

-never upgrade

Grandstream Networks, Inc.	HT–286 User Manual	Page 9 of 28
	Firmware 1.1.0.31	Last Updated: 1/2009