Muratec F-160 operating instructions Printing a delayed command list, Printing a stored document

Beyond the Basics

Printing a delayed command list

Your machine can print a command list which tells you:

•The command’s identification number

•The phone number, or “remote location”

•The start time (this appears in a DD,HH:MM format)

•A “note” telling if the command is a polling or F-Codeoperation (see pages 2.29–2.31 for more on polling and 2.35–2.44 for more on F-Code communication).

To print a delayed command list, press /PROGRAM, F, 1, ENTER.

Printing a stored document

Your fax machine can print out each document stored for delayed transmission. To print a stored document, you’ll need to know the document’s command number, which you can get by either reviewing the commands (see page 2.18) or printing a delayed command list (see above).

1	Press /PROGRAM, F, 2, ENTER. The LCD shows:
		Print Stored Doc.
		Command No.:	_
2
	Use the numeric keypad to enter the command’s identification number, 01– 99.
	For example, we could enter the following for the very first command, 01:

Print Stored Doc.

Command No.: 01_

3 Press ENTER. Your fax machine will print a copy of the stored document.

2.19