Muratec F-160 Select F-Code Box 01No Number Stored 01NY Branch Office, 03Box NameUpper

Beyond the Basics

To create or modify an F-Code box:

1	Keep pen and paper with you as you follow these steps. As you decide on a
	sub-address and enter it into your machine, write it down. Remember to: (1)
	write down which box goes with which sub-address, (2) write down any pass-
	words or I.D. codes you enter, (3) keep these printed records in a safe place.
2	Press /PROGRAM, P, 1, ENTER. Depending on whether you already have a
	name entered for F-Code box 01, the LCD shows:
		Select F-Code Box	or	Select F-Code Box
		01:No Number Stored		01:NY Branch Office
3
	Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
	box you want to create or modify. Here, we’ve entered 0, 3 and see either:
		Select F-Code Box	or	Select F-Code Box
		03:No Number Stored		03:Muratec America
4
	If want to select a different F-Code box than the one that appears on the LCD,
	use the numeric keypad to enter the two-digit F-Code box number now.
5	Press ENTER. What you do next depends on whether you’re creating or
	modifying the F-Code box:
	If creating — skip to step 7.
	If modifying — the LCD asks you to enter the proper I.D. code. The LCD shows:
		03:Set F-Code Box
		Enter I.D. Code:****
6
	Use the numeric keypad to enter the 4-digit I.D. code (not the ITU-Tsub-
	address and not the ITU-Tpassword) and then press ENTER.
	Note: If you enter an invalid I.D. code, the fax machine rejects the attempt
		and aborts this operation.
7	The machine is now asking you to name this F-Code box. The LCD shows:
		03:Box Name;Upper	or	03:Box Name;Upper
		_		Muratec America_

If you do not want to enter or change this F-Code box’s name, skip to step 9. If you do want to enter or change this F-Code box’s name, go on to step 8.

8 Enter the name the same way you entered your fax name during EasyStart. An F-Code box’s name can be up to 16 characters in length.

Important: As in EasyStart, enter letters and other non-numeric characters through the one-touch keys.

03:Box Name;Upper

_

The word “Upper” means the machine is currently set for entering only upper- case letters. If you press R, the machine will see it as an R (not an r).

To enter a lower-case letter, press ALPHABET. The display changes to:

03:Box Name;Lower

_

This means pressing one-touch keys will enter lower-case letters. For exam- ple, pressing R, will produce an r (not an R) on the display.

To switch back for upper-case entries, press ALPHABET.

Use the one-touch keypad to enter spaces, punctuation and symbols.

You can also use the CODE function to enter characters. Please review the explanation on page 2.2.

Note: To erase characters, press CANCEL to erase to the left.

To change just one character in the name, press to move the cursor left, or /PROGRAM to move it right. Press CANCEL to erase the character. Then re-enter the name correctly.

9 Press ENTER to save the box’s name and continue. The LCD shows:

03:Sub-Address No.	or	03:Sub-Address No.
_		123456_

The fax machine now asks for this F-Code box’s sub-address. This is the numerical identifier you must enter in order to communicate with any remote F-Code compatible fax.

If you do not want to change an existing sub-address, skip to step 11.

10 Use the numeric keypad to enter the sub-address to identify this F-Code box. The sub-address can be up to 20 characters in length and include any combination of numbers and the * and # characters (but no other non- numeric characters).

03:Sub-Address No. 654321_

2.36