Muratec F-160 Fax dialling via speed-dial, Enter Speed-Dial No, Shipping & Receiving S018

	Note: To assign this number to all 32 call groups, enter 0 (zero).
	Note: To erase characters, press CANCEL to erase to the left.
	To change just one character, press to move the cursor to the left, or
	/PROGRAM to move it to the right. Press CANCEL to erase the charac-
	ter. Then re-enter the setting correctly.
14	Press ENTER.
	The LCD will display the next empty speed-dial number.

If you want to enter this speed-dial number, go back to step 4.

If you do not want to enter any more speed-dial numbers, press STOP to finish. If you do not want to enter the currently displayed speed-dial number but do want to enter another speed-dial number, go back to step 2.

Fax dialling via speed-dial

To dial a fax call using a speed-dial number:

1 Insert the document.

2 Adjust resolution and contrast if necessary.

3 Toggle between transmission from the feeder or from memory if necessary, by

pressing MEMORY TRANSMIT.

4 Press SPEED DIAL/TEL INDEX. The LCD shows:

Enter Speed-Dial No.

S_

5 Use the numeric keypad to enter the three-digit identifier (such as 018, in this example) for the speed-dial number you want to dial. The LCD shows:

Shipping & Receiving

S018_

6 Press START.

What happens next depends on whether you specified transmission from memory or transmission from the feeder:

If you specified quick memory transmission:

•Your fax machine scans the first page of your document into memory, then dials the other fax machine.

•While dialling, your machine scans the other documents into memory.

•The LCD shows the Location ID and the document’s width and resolution settings:

Beyond the Basics

Shipping & Receiving

A4 Normal

Note: If the entry doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax transmits the scanned document directly from memory. (To review quick memory transmission, see page 2.29.)

If you specified normal transmission from memory:

•Your fax machine scans your entire document into memory, then dials the other fax machine.

•The LCD shows the Location ID and the document’s width and resolution settings:

Shipping & Receiving

A4 Normal

Note: If the speed-dial entry doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax will transmit the document directly from memory. (To review memory transmission, see page 1.13.)

If you specified transmission from the feeder:

•Your fax machine dials the other fax machine.

•When the other machine answers, your fax feeds the document through its scanner, transmitting as it goes.

•The LCD shows the Location ID and the document’s width and resolution settings:

Shipping & Receiving

A4 Normal

Note: If the speed-dial number doesn’t have a Location ID, the number appears.

Phoning via speed-dial

To dial a phone call using a speed-dial number, you must have an optional handset attached to your machine. To make the call:

1 Obtain a dial tone by doing one of the following:

•Lift the handset

•Press MONITOR/CALL to use the monitor speaker

2 Press SPEED DIAL/TEL INDEX. The LCD shows:

** Tel Mode **

S_

2.13