
Beyond the Basics
7 Use the numeric keypad to enter up to 230 fax numbers — you can use any combination of call groups,
Important: Do not press ENTER.
Press BROADCAST to enter a comma between each number or call group.
Important: Do not insert a comma after the last number.
To enter a
To enter a call group, press GROUP DIAL and the group’s identifier number.
66:Fax#/Com-Options G5,G7,[01],S006,9-55
Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or
/PROGRAM to scroll to the right.
Note: To erase characters, press CANCEL to erase to the left.
To change just one character in the number, press to move the cur- sor left, or
/PROGRAM to move it right. Press CANCEL to erase it. Then
8 If you want the broadcast to begin immediately every time you press the key, press ENTER and skip to step 11.
If you want to delay the broadcast, press
9 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05 PM on the 30th.”)
To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)
To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
10 Press ENTER, ENTER.
11 The LCD asks if you want to program additional settings for this
66: Option: Off
Program/Enter
If you do not want to program additional settings, press ENTER. Then skip to step 25.
If you do want to program additional settings, press /PROGRAM and ENTER.
12 The LCD asks which resolution you want to set for this
66:Primary: ---
Program/Enter
13 Press /PROGRAM until the mode you want appears.
Note: For any of the following settings, choosing
14 Press ENTER. The LCD asks you to select a contrast mode for this programma- ble
66:Contrast: ---
Program/Enter
15 | Press /PROGRAM until the mode you want appears. |
16 | Press ENTER. The LCD asks is you want the confirmation stamp on or off for |
| this programmable |
66:Stamp: ---
Program/Enter
17 | Press /PROGRAM until the mode you want appears. |
18 | Press ENTER. The LCD asks you for the type of confirmation report you want to |
| set for this programmable |
66:Conf.Report: ---
Program/Enter
19 | Press /PROGRAM until the mode you want appears. |
20 | Press ENTER. The LCD asks if you want to send a cover page for this program- |
| mable |
66:Cover Page: ---
Program/Enter
21 Press /PROGRAM until the mode you want appears.
2.48