Muratec F-160 operating instructions Programming a broadcast / group

until the mode you want appears.

14	Press /PROGRAM until the mode you want appears.
15	Press ENTER. The LCD asks if you want the confirmation stamp on or off when
	using this programmable one-touch number.

68:Stamp: ---

Program/Enter

16	Press /PROGRAM until the mode you want appears.
17	Press ENTER. The LCD asks if you want the memory transmission on or off
	when using this programmable one-touch number.

68:Memory Tx: ---

Program/Enter

18 Press /PROGRAM

19 Press ENTER. The LCD asks you for the type of confirmation report you want to set for this programmable one-touch number.

68:Conf.Report: ---

Program/Enter

20	Press /PROGRAM until the mode you want appears.
21	Press ENTER. The LCD asks if you want to send a cover page for this program-
	mable one-touch number.

68:Cover Page: ---

Program/Enter

22	Press /PROGRAM until the mode you want appears.
23	Press ENTER. The LCD asks if you want to turn the Copy & Fax feature on or
	off for this programmable one-touch number.

68:Copy&Fax: ---

Program/Enter

24	Press /PROGRAM until the mode you want appears.
25	Press ENTER.
26	The LCD now displays the next programmable one-touch key.
	If you do not want to enter or change any other key’s programming, press STOP.

Your machine returns to standby mode.

If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.

Beyond the Basics

Programming a broadcast / group

Programming a broadcast is very similar to programming a delayed transmission. But instead of sending to just one phone number, you set up multiple numbers for the transmission.

To program a broadcast / group into a programmable one-touch key:

1	Press /PROGRAM, C, 1, ENTER. The LCD shows the first empty programmable
	one-touch number available:

Select Program No. 65:No Number Stored

Note: If a programmable one-touch number other than 65 appears on the LCD, it means that you have already entered a number for 65.

Note: To erase a programmable one-touch key, see page 2.58.

2 Press the key you want to program or change. Here, we’ve selected 66.

Select Program No. 66:No Number Stored

Note: If your previous command for this key was for a broadcast / group transmission and you want to keep this key programmed for a broad- cast / group transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored command before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER. The LCD asks for the type of operation you want to program into the one-touch:

66:Type: Comm. Program/Enter

Note: If changing a previously stored command, skip to step 7.

5 Press /PROGRAM until “Comm.” appears.

66:Type: Comm. Program/Enter

6 Press ENTER. The LCD now shows either

66:Fax#/Com-Options	or	66:Fax#/Com-Options
_		9-5558743_

2.47