
Note: Do not enter any characters here. If you do, you can’t program a batch transmission into this key. If you accidentally enter characters here, press CANCEL as many times as needed to erase all of them before you go on to step 7.
Note: If this key already holds a batch transmission, skip to step 8.
7 Press
Batch Tx
Enter Box No. _
8 Use the numeric keypad to enter the
Batch Tx
Enter Box No. 5_
Note: To change an identifier already entered, press CANCEL to erase it. Then
9 Press ENTER.
10 The LCD asks if you want to program additional settings for this programma- ble
67: Option: Off
Program/Enter
If you do not want to program additional settings, press ENTER and then skip to step 22.
If you do want to program additional settings, press /PROGRAM and ENTER.
11 The LCD asks which resolution you want to set for this programmable one- touch number.
67:Primary: ---
Program/Enter
12 Press /PROGRAM until the mode you want appears.
Note: For any of the following settings, choosing
13 Press ENTER. The LCD asks which contrast mode you want when using this programmable
67:Contrast: ---
Program/Enter
14 Press /PROGRAM until the mode you want appears.
Beyond the Basics
15 Press ENTER. The LCD asks if you want the confirmation stamp on or off when using this programmable
67:Stamp: ---
Program/Enter
16 | Press /PROGRAM until the mode you want appears. |
17 | Press ENTER. The LCD asks if you want to send a cover page when using this |
| programmable |
67:Cover Page: ---
Program/Enter
18 | Press /PROGRAM until the mode you want appears. |
19 | Press ENTER. The LCD asks if you want the Copy & Fax feature on or off when |
| using this programmable |
67:Copy&Fax: ---
Program/Enter
20 | Press /PROGRAM until the mode you want appears. |
21 | Press ENTER. |
22 | The LCD now displays the next programmable |
| If you do not want to enter or change any other key’s programming, press STOP |
to return your machine to standby mode.
If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.
2.51