10 Press ENTER. The LCD shows:
Enter Password
_
Note: If this box doesn’t have a password, press ENTER. Then skip to step 12.
11 Use the numeric keypad to enter the
Enter Password 654321_
When finished, press ENTER.
12 If you want the transmission to begin immediately every time you press the key, press ENTER and skip to step 15.
If you want to delay the transmission (perhaps to take advantage of lower phone rates), press
13 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05 PM on the 30th.”)
To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)
To select this option, use the numeric keypad to enter 0, 0 and then the time when the fax could perform the command:
Delayed
Enter Time: 00/17:05
14 Press ENTER, ENTER.
15 The LCD now displays the next programmable
If you do not want to enter or change any other key’s programming, press STOP to return your machine to its usual standby mode.
If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.
Beyond the Basics
Programming printouts
To program a programmable
1 | Press /PROGRAM, C, 1, ENTER. The LCD shows the first empty programmable |
|
Select Program No. 65:No Number Stored
Note: If a programmable
Note: To erase a programmable
2 Press the key you want to program or change. Here, we’ve selected 68.
Select Program No. 68:No Number Stored
Note: If your previous command for this key was for printing a list and you want to keep this key programmed for printing a list, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for exam- ple), then you first must erase the stored command before programming the new one.
3 To select a different programmable
4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable
68:Type: Comm. Program/Enter
Note: If changing a previously stored command, skip to step 7.
5 Press /PROGRAM until “List.” appears.
68:Type: List Program/Enter
6 Press ENTER. The LCD asks which list you want to program into the program- mable
68:Print One-Touch Program/Enter
2.55