12 If you want the transmission to begin immediately every time you press the key, press ENTER and skip to step 15.

If you want to delay the transmission, press COM-OPTIONS,ENTER.

13 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time when the fax should perform the command:

Delayed

Enter Time: 00/17:05

14 Press ENTER, ENTER.

15 The LCD asks if you want to program additional settings for this programma- ble one-touch number:

70: Option: Off

Program/Enter

If you do not want to program additional settings, press ENTER. Then skip to step 31.

If you do want to program additional settings, press /PROGRAM and ENTER.

16 The LCD asks which resolution you want when using this programmable one- touch number.

70:Primary: ---

Program/Enter

17 Press /PROGRAM until the mode you want appears.

Note: For any of the following settings, choosing “---” tells the machine to use its default setting for this one-touch key.

Beyond the Basics

18 Press ENTER. The LCD asks which contrast mode you want when using this programmable one-touch number.

70:Contrast: ---

Program/Enter

19

Press /PROGRAM until the mode you want appears.

20

Press ENTER. The LCD asks if you want the confirmation stamp on or off when

 

using this programmable one-touch number.

70:Stamp: ---

Program/Enter

21

Press /PROGRAM until the mode you want appears.

22

Press ENTER. The LCD asks if you want the memory transmission on or off

 

when using this programmable one-touch number.

70:Memory Tx: ---

Program/Enter

23

Press /PROGRAM until the mode you want appears.

24

Press ENTER. The LCD asks which confirmation report you want to receive

 

each time you use this programmable one-touch number.

70:Conf.Report: ---

Program/Enter

25

Press /PROGRAM until the mode you want appears.

26

Press ENTER. The LCD asks if you want to send a cover page each time you use

 

this programmable one-touch number.

70:Cover Page: ---

Program/Enter

27

Press /PROGRAM until the mode you want appears.

28

Press ENTER. The LCD asks if you want the Copy & Fax feature on or off each

 

time you use this programmable one-touch number.

70:Copy&Fax: ---

Program/Enter

29

Press /PROGRAM until the mode you want appears.

30

Press ENTER.

2.53

Page 84
Image 84
Muratec F-160 operating instructions Each time you use this programmable one-touch number