Muratec F-160 Tel/Fax Ready mode, Ans/Fax Ready mode, Tel/Fax Ready Program/Enter

Tel/Fax Ready mode

The Tel/Fax Ready mode is a combination of the Tel Ready and Fax Ready modes.

Use it if: An optional handset is installed on your fax machine and

You’re using the machine as both a telephone and a fax machine

In this mode: Your fax machine rings the number of times you’ve identified in the user settings. If you don’t use the optional handset to answer the call, your fax machine answers the call. If a caller sends a fax, your machine begins receiving it. If a voice call comes in, your machine detects it and sounds a special ring, telling you to answer using the optional handset.

To select Tel/Fax Ready:

1	If there’s a document in the feeder, press STOP so it will feed out.
2	Press AUTO ANSWER until the Auto Answer light glows.
3	Press		/PROGRAM, I, and then press ENTER five times. The LCD shows your
	current default reception mode:
		Fax Ready
			Program/Enter
4
	Press		or /PROGRAM until the LCD shows:
		Tel/Fax Ready
			Program/Enter
5
	Press ENTER to save the setting.
6	Press STOP to return the machine to standby mode.

Getting started

Ans/Fax Ready mode

Use it if: You’re using an answering machine that’s connected directly to your fax machine.

In this mode: An answering machine connected to your fax machine answers each call. If a voice call comes in, the answering machine begins to record the incoming message. If your fax machine hears a fax tone, it begins receiving the fax message.

To select Ans/Fax Ready:

1	If there’s a document in the feeder, press STOP so it will feed out.
2	Press AUTO ANSWER until the Auto Answer light glows.
3	Press		/PROGRAM, I, and then press ENTER five times. The LCD shows your
	current default reception mode:
		Fax Ready
			Program/Enter
4
	Press		or /PROGRAM until the LCD shows:
		Ans/Fax Ready
			Program/Enter
5
	Press ENTER to save the setting.
6	Press STOP to return the machine to standby mode.

1.19