Muratec F-160 Programming an F-Code transmission, 70Fax#/Com-Options 5558743

Beyond the Basics

Programming an F-Code transmission

For this operation to work, two things must be true:

•You must know how the remote fax is using each F-Code box to which you’re transmitting — for example, as a security box or a relay box. Different fax manu- facturers may use slightly different terms, but the concepts are the same.

•You must know the remote fax’s ITU-Tsub-address and password for each box to which you want to transmit.

To program an F-Code transmission into a programmable one-touch key:

1	Press /PROGRAM, C, 1, ENTER. The LCD shows the first empty programmable
	one-touch number available:

Select Program No. 65:No Number Stored

Note: If a programmable one-touch number other than 65 appears on the LCD, it means that you have already entered a number for 65.

Note: To erase a programmable one-touch key, see page 2.58.

2 Press the key you want to program or change. Here, we’ve selected 70.

Select Program No. 70:No Number Stored

Note: If your previous command for this key was for an F-Code transmis- sion and you want to keep this key programmed for an F-Code transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored com- mand before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER. The LCD asks for the type of operation you want to program into the one-touch:

70:Type: Comm. Program/Enter

Note: If changing a previously stored command, skip to step 7.

5 Press /PROGRAM until “Comm.” appears.

70:Type: Comm. Program/Enter

6 Press ENTER. The LCD now shows either:

70:Fax#/Com-Options	or	70:Fax#/Com-Options
_		9-5558743_

7 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

70:Fax#/Com-Options 9-5558422_

Your display shows only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or /PROGRAM to scroll to the right.

Important: Do not press ENTER.

Note: To erase characters, press CANCEL to erase to the left.

To change just one number, press to move the cursor left, or /PROGRAM to move it right. Press CANCEL to erase it. Then re-enter

the number correctly.

8 Now, while you still can see the fax number on the LCD, press COM-OPTIONSthree times and then press ENTER. The LCD shows:

Enter Sub-Address

_

9 Use the numeric keypad to enter the ITU-Tsub-address for the box to which you want to send the document. Here, we’ve entered 123456:

Enter Sub-Address 123456_

10 Press ENTER. The LCD shows:

Enter Password

_

Note: If there isn’t a password for this box, press ENTER, then skip to step 12.

11 Use the numeric keypad to enter the appropriate ITU-Tpassword for the box. Here, we’ve entered 654321:

Enter Password 654321_

When finished, press ENTER.

2.52