Muratec F-160 Type Comm. Program/Enter, 68Fax#/Com-Options 5558743, Delayed Enter Time 11/2030

Beyond the Basics

4 Press ENTER. The LCD asks for the type of operation you want to program into the programmable one-touch:

68:Type: Comm. Program/Enter

Note: If you’re changing a previously stored command, skip to step 7.

5 Press /PROGRAM repeatedly until “Comm.” appears.

68:Type: Comm. Program/Enter

6 Press ENTER. The LCD now shows either:

68:Fax#/Com-Options	or	68:Fax#/Com-Options
_		9-5558743_

7 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

68:Fax#/Com-Options 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or /PROGRAM to scroll to the right.

Important: Do not press ENTER.

Note: To erase characters, press CANCEL to erase to the left.

If you want to change just one character in the number, press to move the cursor left, or /PROGRAM to move it right. Press CANCEL to erase it. Then re-enter the number correctly.

8 Now, while you can still see the fax number on the LCD, press COM-OPTIONS,ENTER. The LCD shows:

Delayed

Enter Time: 11/20:30

9 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should perform the command:

Delayed

Enter Time: 00/17:05

10 Press ENTER, ENTER. The LCD asks if you want to make additional settings for this programmable one-touch number.

68: Option: Off

Program/Enter

If you do not want to make additional settings, press ENTER. Skip to step 26. If you do want to make additional settings, press /PROGRAM and ENTER.

11 The LCD asks which resolution you want to use for this programmable one- touch number.

68:Primary: ---

Program/Enter

12 Press /PROGRAM until the mode you want appears.

Note: For any of the following settings, choosing “---” tells the machine to use its default setting for this programmable one-touch key.

13 Press ENTER. The LCD asks you to select a contrast mode for each programma- ble one-touch number.

68:Contrast: ---

Program/Enter

2.46