Muratec F-160 Enter No, Feeder In Use, Hang Up Phone, Relay Box, Secure Box, Use In P OneTouch

Just in case …
What you see on the LCD	What it means/What to do
Document Stored	You tried to erase a batch box which contains at
	least one document. Erase the document(s), then
	try again.
Enter No. (00-32)	You tried to enter a call group number greater
	than 32. Your machine can maintain 32 call
	groups, numbered 1–32(call group 0 covers all
	the groups). Determine the correct call group
	and re-enter its identifier number.
Enter No. (01-99)	You tried to request “0” copies from your fax,
	which can create 1–99 copies of a document. Re-
	enter the correct quantity.
Feeder In Use	The command you tried to enter requires the
	use of the feeder, which is in use. Wait for the fax
	to finish using the feeder, then try again.
Hang Up Phone	The optional handset is off the hook. Hang it up,
	making sure the upper part of the handset
	presses down on the “flash” button.
In Relay Box	You tried to store or erase a document for polling
	in or from an F-Code box which is set to be a relay
	box. Select an F-Code box which is set to be a bul-
	letin box, then try again.
	. . . or . . .
	You tried to print a document stored in an F-
	Code box, but it is set to be a relay box. Select an
	F-Code box which is set to be a bulletin or secure
	box.
In Secure Box	You tried to store or erase a document for
	polling in or from an F-Code box which is set to
	be a security box. Select an F-Code box which is
	set to be a bulletin box, then try again.
What you see on the LCD	What it means/What to do
In Use In P OneTouch	You tried to erase an F-Code box which is
	entered in a programmable one-touch key. Erase
	the programmable one-touch key in which this F-
	Code box is entered, then try again.
Insert Document	There was no document in the document feeder
	when you tried to send a fax or make a copy.
	Place a document in the feeder and try again.

What you see on the LCD	What it means/What to do
Invalid I.D. Code	The F-Code box I.D. code you entered isn’t valid.
	Try re-entering your F-Code box I.D. code.
Invalid Number	You pressed a key which has no function for the
	current operation.
Invalid Passcode	The protection passcode you entered isn’t valid.
	Repeat the operation, entering the correct protec-
	tion passcode.
Line Busy	You tried to erase or print a document which
	someone is polling from your machine.
	. . . or . . .
	You tried to print a document during transmis-
	sion.
Memory OverFlow	During transmission (or copying), you tried to
	enter more pages into memory than your fax
	could store. Press START (or COPY) to tell your fax
	to keep as many pages in memory as possible, or
	press CANCEL to delete from memory all pages
	stored during this operation (but not previous
	operations).
No Command	You pressed REVIEW COMMANDS to review
	upcoming commands or you requested a delayed
	command list, but your fax machine had none
	stored.
No Dept. Code	You tried to turn on the department code setting
	but there are no department codes stored in
	your fax machine. Store at least one department
	code, then try again.
No Document Stored	You tried to print a document from memory, but
	your fax machine doesn’t have any stored.
No Number Stored	You selected an autodialler number for which
	there is no phone number programmed. Either
	choose another autodialler number or dial a
	phone number directly from the numeric keypad.
No Passcode	You tried to protect an operation or department
	code but there’s no protection passcode stored in
	your fax machine. Store a protection passcode in
	your machine, then try protecting the operation
	or department code again.

3.6