Muratec F-160 operating instructions Using speed-dial numbers

2 Press the key for the one-touch number you want to erase. Here, we’ve selected 02:

Select One-Touch 02:9-1-555-987-6543

3 If you want to erase a number stored in a different one-touch key than what appears on the LCD, press that key now.

4 Press ENTER. The LCD shows:

Erase One-Touch

Check Program/Enter

Important: If you want to quit without erasing the one-touch number you’ve selected, press /PROGRAM. The fax will return to step 2.

5 Press ENTER to erase the number.

Erase One-Touch

** Complete **

To erase another one-touch number, repeat steps 2–5. Or press STOP to return to standby mode.

Printing a list of one-touch numbers

Forgot which number is stored in which one-touch key? Just print a list of your one- touch numbers. The list includes each key’s number, the Location ID (if any), fax/telephone number and group number(s) you’ve stored in the key.

To print a list of one-touch numbers, press /PROGRAM, A, 3, ENTER.

Using speed-dial numbers

Your fax machine will store up to 136 speed-dial numbers, designated by three-digit identifier codes from 001 through 136.

Entering or changing a speed-dial number

1 Press /PROGRAM, B, 1, ENTER. The LCD shows an empty speed-dial number:

Enter Speed-Dial No.

001:No Number Stored

Note: If a speed-dial number other than 001 appears on the LCD, it means you have already entered a number for 001.

					Beyond the Basics
2
	Use the numeric keypad to enter the desired speed-dial number’s three-digit
	identifier code. Here, we’ve entered 005 and the LCD shows either:
		Enter Speed-Dial No.	or		Enter Speed-Dial No.
		005:No Number Stored		005:9-555-397-0123
3
	If you want to select a different speed-dial number, press that number’s three-
	digit identifier code now. That number appears on the LCD.
	Important: When entering the identifier code for speed-dial numbers less
		than 100, you must enter leading zeroes to make three digits. For
		example, 001-099.
4	Press ENTER. Depending on whether you already have a number entered for
	this speed-dial number, the LCD now shows either:
		005:Fax Number	or		005:Fax Number
		_			9-555-397-0123_
5
	Use the numeric keypad to enter the speed-dial number exactly as your
	machine should dial it, including whatever access codes your phone system
	requires. (You may want to review “Special dialling characters,” page 2.7.) The
	number can be up to 40 characters in length:
		005:Fax Number
		9-1-555-567-1234_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or /PROGRAM to scroll to the right.

Note: To erase characters, press CANCEL to erase to the left.

To change one character in the number, press to move the cursor left, or /PROGRAM to move it right. Press CANCEL to erase the charac- ter. Then re-enter the number correctly.

6 When the number appears as you want it, press ENTER to store it.

2.11