
Just in case …
| Printouts have irregularities |
ABCDE | • The paper you’re using may have absorbed moisture, per- |
ABCDE | haps due either to high humidity or water having been |
spilled on the paper supply. Toner will not adhere well to | |
ABCDE | wet paper. |
ABCDE | Replace the paper with dry paper and try printing again. |
| |
ABCDE |
|
|
|
|
| Printouts have white and/or black lines |
ABCDE |
| • The toner cartridge or drum cartridge may be defective. |
ABCDE |
| Remove the cartridges and check them for damage. |
| If the problem persists, replace either or both of the car- | |
ABCDE |
| tridges as indicated. |
ABCDE |
| • The charger may be dirty. |
ABCDE |
| Your machine normally cleans the charger automatically. |
| If other solutions fail, please contact your authorised | |
|
| Muratec dealer. |
|
|
Printouts have black lines or multiple streaks
•The toner cartridge may have been stored improperly. Try printing test pages to clear up the problem:
1Press /PROGRAM,
The fax will print one page of a chequered test pattern.
2After printing the page, the machine asks if you want to print another test page. The LCD shows:
Printer Test
Start/Stop
3 If the printing problem persists, press START to print another test page.
OR
4 Pressmode.STOP to cancel printing and return to standby
| Printouts have toner smudges | |
ABCDE | • The toner may be unevenly distributed inside the toner | |
ABCDE | cartridge. | |
Remove the toner cartridge and shake it a few times to | ||
ABCDE | redistribute the toner inside. If the problem persists, replace | |
ABCDE | the cartridge. | |
• The toner cartridge or drum cartridge may be defective. | ||
ABCDE | ||
Remove the cartridges and check them for damage. If the | ||
| problem persists, replace either or both of the cartridges as | |
| ||
| indicated. |
•If you find smudges on the back of the printouts, the trans- port roller may be dirty.
Your machine normally cleans the transport roller automat- ically. If other solutions fail, please contact your authorised Muratec dealer.
| Printouts have white spots |
ABCDE | • The charger may be dirty. |
ABCDE | Your machine normally cleans the charger automatically. |
If other solutions fail, please contact your authorised | |
ABCDE | Muratec dealer. |
ABCDE |
|
ABCDE |
|
|
|
3.4