
Note: If you make a mistake, press CANCEL to erase to the left.
To change just one number, press to move left, or
/PROGRAM to move right. Press CANCEL to erase the number. Then
6
7 The LCD now asks you to enter the name you want to appear at the top of faxes you send. The name may be up to 22 characters in length.
Use the
Your Name ;Upper
_
The word “Upper” means the machine will enter only
To type a
Your Name ;Lower
_
This means pressing
To switch back for
To enter spaces, punctuation and symbols, use the
In “Beyond the Basics,” we’ll show you how to use the CODE function to enter even more characters (see page 2.2).
Note: If you make a mistake, press CANCEL to erase to the left.
To change just one character in the name, press to move left, or
/PROGRAM, to move right. Press CANCEL to erase the character. Then
8 Press ENTER to save the setting and continue.
9 The LCD now indicates the type of dialing.
Phone Type: Tone
Program/Enter
10 Press ENTER and continue.
11 The LCD now shows the machine’s current reception mode.
Fax Ready
Program/Enter
|
|
|
| Getting started |
12 | For now, press or /PROGRAM until the setting Fax Ready appears. (This | |||
| setting can always be changed. We’ll discuss reception modes further on pages | |||
|
|
| ||
13 | Press ENTER to save the setting. | |||
14 | The LCD now asks if you want to print a list of all of the machine’s settings. | |||
|
| Print Setting List |
|
|
|
| Enter/Stop |
|
|
|
|
|
|
|
| • If you want to print a list, make sure paper is loaded into your machine for | |||
|
| printing, then press ENTER. Your fax machine will print a list of its settings. | ||
| • If you don’t want to print a list, press STOP. Your machine will return to | |||
|
| standby mode. | ||
| EasyStart is complete! |
1.11