Setting the System Hold Time
Menu
Program System
Select the system
Edit Sys Option
Set Hold Time
This setting controls how many seconds the scanner scans a system before moving to the next unlocked system. Enter a value from
Notes:
•This setting is available only when a control channel exists in a trunked system.
•If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity).
•The default setting is 2 seconds for each system.
•For conventional systems, all unlocked channels will be scanned at least once regardless of this setting.
•The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires.
•Due to the control method for these system types, the scanner always scans LTR and EDACS SCAT systems for at least 1 second.
Setting the Channel Delay Time
Menu
Program System
Select the system
Edit Sys Option
Set Delay Time
This setting controls how many seconds the scanner waits after a transmission ends before resuming
82
