Programming Motorola Systems
Menu
Program System
New System
MOT
Next, rotate the scroll control to select the type of Motorola system you want to program, then briefly press the scroll control to select it.
•800MHz Standard - Use for 800 MHz systems that use the standard band plan
•800MHz Splinter - Use for 800 MHz systems that use the splinter band plan (typically near international borders)
Note: Splinter systems have frequencies below 866 MHz that end in 0. For example, 851.0250 would be the frequency of a splinter system.
•900MHz Band - Use for 900 MHz systems
•VHF band - Use for VHF systems
•UHF band - Use for UHF systems
Confirm? Yes=“E”/ No=“.”
Next, refer to the appropriate section to set system- wide options. For most settings, you can accept the default. However, for the items in bold, you must enter information in order for your scanner to scan the system.
•See “Editing the System Name” on Page 80
•See “Editing the System Quick Key” on Page 81
•See “Setting System Lockout” on Page 81
•See “Setting the System Hold Time” on Page 82
•See “Setting the Channel Delay Time” on Page 82
•See “Setting ID Scan/Search (Trunked Systems Only)” on Page 83
•See “Editing the Fleet Map (Motorola Systems Only)” on Page 83 (must be set up for Type I and Type II Hybrid systems)
•See“Setting the Motorola Status Bit (Motorola Sys- tems Only)” on Page 84
Programming Radio Systems
69
