Setting the Audio AGC, Selecting the Bar Antenna | Uniden BR330T

Pressing any key while the backlight is on extends the

backlight period. Pressing while the backlight is on turns off the backlight.

Setting the Audio AGC

Menu

Settings

Set Audio AGC

This setting helps balance the audio level you hear as you listen to different radio sources so you can hear them at a similar volume. Use this setting if you listen to an audio source that has natural changes in audio level for which you want to compensate.

•On Press the scroll control to select. Audio AGC is turned on.

•Off Press the scroll control to select. Audio AGC is turned off.

Selecting the Bar Antenna

Menu

Settings

Set Bar Antenna

This setting lets you switch between the internal bar antenna and the antenna connected to the SMA connector.

Note: The bar antenna receives signals between 0.1 and 1.7 MHz. It cannot receive signals out of this range even if you select it.

•On Press the scroll control to select. The bar antenna is selected.

•Off Press the scroll control to select.

The antenna attached to the SMA connector is selected.

Tuning The Bar Antenna

Follow the steps under “Selecting the Bar Antenna” for best reception of AM radio signals.

1.Make sure to select the Bar Antenna

2.Tune to a frequency between 0.1 and 1.7 MHz.

3. Hold down

Func

and tap the scroll control twice.

Other Settings

55

Image 55

Uniden BR330T owner manual Setting the Audio AGC, Selecting the Bar Antenna, Tuning The Bar Antenna, Other Settings

Contents

OWNER’S Manual Earphone Warning Precautions Precautions Contents Contents 100 123 Scanning Legally FCC Wants You to Know FCC Wants You to Know Upper Edge Modulation Step kHz Type Introduction Feature Highlights Feature HighlightsPage Trunk Tracking Weather Page About This Manual Using the Multifunction Scroll ControlEntering Text Menu Program System How the Scanner’s Controls Are Represented in This ManualEdit Name = Edacs = LTR Understanding Scanning What is Scanning?Understanding Scanning Understanding the Scanner’s Memory What is CTCSS/DCS? What is Searching? 023 025 026 031 032 036 043 047 Conventional Scanning Repeater Operation Simplex Operation Trunked Scanning What is Trunk Tracking? Understanding Scanning Motorola Trunking Types of Trunking Systems Edacs Trunking LTR Trunking Call Motorola/EDACS Where To Get More InformationInformation On The Internet Page Included With Your Scanner Included With Your Scanner Using Internal Batteries Setting Up Your Scanner Setting Up Your Scanner Using Rechargeable Batteries Removing the Display Sticker Using AC Power Connecting an Optional Antenna Connecting the AntennaConnecting an Earphone/Headphone Connecting an Extension Speaker Attaching the Wrist Strap Attaching the Belt ClipLook At The Keypad Hold Pri Rcl Look At The Display Func Using Func Using Menu Once. Volume Level and a number appear on the display Turning On the Scanner and Setting the SquelchBasic Operation Preprogrammed System Tips Scanning SystemsBasic Operation Selecting Systems to Scan Locking/Unlocking Systems Selecting System Channel GroupsLocking/Unlocking Channels Temporarily Holding On a System ID Scan/ID Search ModeHolding On a Channel Quick-Storing Channels or Talk Group ID’s Quickly Storing an ID During ID SearchQuick Tgid Save? Monitoring Trunking Activity Quickly Recalling ChannelsToggling Channel Alpha Tags Using the Menu Using the Menu Close Call Only Menu/Submenu Option Menu Programming Systems Menu Edcs Locking/Unlocking the Keypad and Scroll Other SettingsAdjusting the Key Beep Displaying System Information Using the Backlight Turning Power Save On or OffPriority Scan Selecting the Bar Antenna Setting the Audio AGCTuning The Bar Antenna Other Settings Restore Preprogram List? Yes=E/ No=. appears Adjusting the Display ContrastConnecting Your Scanner to a Personal Computer Settings Adjust Contrast Xfer Information Wired Clone Using the Cloning OptionsWired Cloning Settings PC Control Menu Xfer Information On-Air Clone On-Air CloningMaster scanner Clone Master Press Scan Key Slave scanner Clone Slave Press Scan Key Other Settings Programming Radio Systems Programming Radio Systems Quickly Programming Racing Systems Off Set CTCSS/DCS Off Advanced Options Yes=E/ No=Set Modulation Auto Set Attenuator Program System New System Racing Confirm? E Manually Programming Racing Systems Edit Car Editing the CarEntering/Editing a Car Number Program System Set Quick Key Setting a Car’s Quick KeyEditing a Driver Edit Driver Editing a Car’s Channel Setting Lockout On a CarDeleting a Car Edit Group New Group Programming Conventional SystemsEntering/Editing Conventional Channel Groups Program System New System Conventional Confirm? Yes=E/ No= Edit Group Entering/Editing Conventional ChannelsEdit Channel New Channel Program System New System Programming Motorola Systems Set Frequencies Setting System Frequencies Setting Attenuation Setting ModulationSet Modulation Entering/Editing Motorola Channels Entering/Editing Motorola Channel Groups Edcs Programming Edacs Systems Set Frequencies New Frequency Entering/Editing Edacs Channels Entering/Editing Edacs Channel Groups Program System New System Confirm? Yes=E/ No= Programming LTR Systems Entering/Editing LTR Channel Groups Entering/Editing LTR Channels/ Talkgroups Programming Radio Systems Editing the System Name System-Level Settings Edit Sys Option Set Quick Key Setting System LockoutProgramming/Editing Optional Settings Editing the System Quick Key Edit Sys Option Set Hold Time Setting the System Hold TimeSetting the Channel Delay Time Edit Sys Option Set Delay Time Edit Sys Option Edit Fleet Map Setting ID Scan/Search Trunked Systems OnlyEditing the Fleet Map Motorola Systems Only Edit Sys Option ID Scan/Search Edit Sys Option Set Status Bit Setting the Motorola Status Bit Motorola Systems Only Edit Sys Option Set I-Call Setting the End Code Operation Motorola Systems OnlySetting I-Call Motorola and Edacs Systems Only Edit Sys Option Set End Code Set Level Setting Emergency Alert Motorola and Edacs Systems OnlySetting Control-Channel Only Motorola Systems Only Edit Sys Option Emergency Alert Reviewing Locked Out Frequencies Setting the Edacs ID Format Edacs Systems OnlyClearing All Locked-Out IDs Deleting Systems Setting System Attenuation Trunked Systems OnlyDelete System Copy System New Sys Name? Group-Level SettingsCopying Systems Entering/Editing the Group Name Setting Group Lockout Setting the Group Quick Key Delete Group Channel-Level SettingsDeleting Groups Editing the Channel Name Editing Frequencies Conventional Channels Only Setting Channel Priority Conventional Channels OnlyInput Frequency Set Alert Setting Channel Alert Set CTCSS/DCS Setting CTCSS/DCS Conventional Channels OnlyEditing the Talk Group ID Trunked Channels Only Edit Tgid Srch/CloCall Opt Set Modulation Setting the System Frequency Modulation Setting Channel Lockout Setting Channel Attenuation Conventional Channels OnlyEdit Channel Select the channel Set Lockout Copying/Pasting Channels Deleting ChannelsDelete Channel Paste Channel Copy Channel Searching and Storing Service SearchSearching and Storing CTCSS/DCS Search Quick SearchSrch/CloCall Opt CTCSS/DCS Search Search for Custom Search Custom Search Search for Edit Custom Editing a Custom Search Range Search for Edit Service Editing a Service Search Auto Search and Store Storing a Conventional System Selecting a SystemSearch for Search and Store Storing a Trunked System Using the Close Call Feature Using the Close Call Feature Close Call Setting Close Call Options Select Beep Select Mode10/15/30/45/60 sec Infinite Close Call Hits Unlocking All Frequencies Search and Close Call OptionsManaging Locked-Out Frequencies Searching for Subaudible Tones Srch/CloCall Opt Broadcast Screen Screening Out Broadcast Sources Srch/CloCall Opt Repeater Find Finding Repeater Output Frequencies Srch/CloCall Opt Max Auto Store Setting the Maximum Auto Store ValueSetting the Modulation Type Setting Attenuation Srch/CloCall Opt Set Data Skip Setting Data SkipSetting the Delay Time Srch/CloCall Opt Set Delay Time MenuSrch/CloCall Opt Set Step Setting the Search Frequency Step Turning Weather Alert On/Off Using Weather Alert SameUsing Weather Alert Same Searching For a Weather Broadcast WX Operation Weather Alert Programming a Same Group WX Operation Program Same Setting WX Alert PriorityWX Operation WX Alt Priority Fire Tone-Out Introduction Using Tone-OutSetting Tone-Out Standby Setting Up Tone-Out Using WeatherUsingAlertToneSAME-Out Page General Use Care and MaintenanceCleaning Care and Maintenance Birdies Repairs Troubleshooting Troubleshooting 126 127 Page Specifications SpecificationsPage 131 Optional Accessories Appendix Appendix 134 Type I Programming Information User Defined Fleet Maps Size Code Restrictions Collecting Information PlanningPlanning Page Frequency-Alpha Tag-Priority Filling Out The Motorola WorksheetSystem Name and Quick Key Group Name and Quick Key System Frequencies System TypeFleet Map Type I or Type I/Type II Hybrid Only Band Plan VHF or UHF Only Filling Out the LTR and Edacs WorksheetTalk Group ID-Alpha Tag-Alert System Frequencies and LCN Conventional System Worksheet Conventional System Worksheet Motorola System Worksheet Motorola System Worksheet 145 LTR/EDACS System Worksheet LTR/EDACS System Worksheet Dade County Preprogrammed Systems County System Preprogrammed Systems 150 One-Year Limited Warranty One-Year Limited WarrantyPage 153 154 155 Register Online Today