Uniden BR330T owner manual Setting System Frequencies, Set Frequencies New Frequency

The scanner creates an empty EDACS system, with a

default name of System n E.

n is a number that increments as you add new systems. E indicates that this is an EDACS system.

Next, refer to the appropriate section to set system- wide options. For most settings, you can accept the default. However, for the items in bold, you must enter information in order for your scanner to scan the system.

•See “Editing the System Name” on Page 80

•See “Editing the System Quick Key” on Page 81

•See “Setting System Lockout” on Page 81

•See “Setting the System Hold Time” on Page 82

•See “Setting the Channel Delay Time” on Page 82

•See “Setting ID Scan/Search (Trunked Systems Only)” on Page 83

•See “Setting I-Call (Motorola and EDACS Sys- tems Only)” on Page 85

•See “Setting the EDACS ID Format (EDACS Sys- tems Only)” on Page 87

•See “Reviewing Locked Out Frequencies” on Page 111

•See “Setting Channel Attenuation (Conventional Channels Only)” on Page 96

•See “Deleting Systems” on Page 88

•See “Copying Systems” on Page 89

•See “Setting System Frequencies” on Page 74

•See “Entering/Editing EDACS Channel Groups” on Page 75

Setting System Frequencies

Menu

Program System

Select the system

Set Frequencies

New Frequency

74