Setting the End Code Operation (Motorola Systems Only)

Menu

Program System

Select the system

Edit Sys Option

Set End Code

This setting determines how the scanner handles the transmission end code sent by most Motorola systems. Select your setting then press E.

Yes - the scanner immediately returns to the control channel when it detects the end code.

Ignore - the scanner does not return to the control channel until the carrier drops.

Note: The default setting is Yes.

Setting I-Call

(Motorola and EDACS Systems Only)

Menu

Program System

Select the system

Edit Sys Option

Set I-Call

This setting determines how your scanner treats I-calls while ID Searching.

On - the scanner tracks I-calls. Press E to select. Off - the scanner ignores I-calls. Press E to select.

Only - the scanner only tracks I-calls and ignores other radio traffic on the system. Press E to select.

Note: The default setting is Off.

Programming/Editing Optional Settings

85

Page 85
Image 85
Uniden BR330T Setting the End Code Operation Motorola Systems Only, Setting I-Call Motorola and Edacs Systems Only