This setting determines how long the scanner waits after a transmission ends before resuming quick search or Close Call operation. Select your setting, then press the scroll control.

Off The scanner resumes immediately when the transmission ends.

1-5 sec The scanner waits the set amount of time after the transmission ends before resuming.

Note: The default setting is 2 sec.

Setting the Search Frequency Step

MenuSrch/CloCall Opt

Set Step

This setting selects the frequency step used for setting the channels. Select your setting, then press the scroll control.

Auto The step is based on the band (see the table at the front of the manual)

5.0kHz, 6.25 kHz, 7.5 kHz, 8.33 kHz, 9 kHz,

10.0kHz, 12.5 kHz, 15.0 kHz, 20.0 kHz,

25.0kHz, 50.0 kHz, 100.0 kHz

The scanner uses the selected step.

Note: The scanner defaults to Auto.

116

Page 116
Image 116
Uniden BR330T owner manual Setting the Search Frequency Step, MenuSrch/CloCall Opt Set Step