Enter a talk group ID
Note: You can enter 
then the 
then 0.
Refer to the appropriate section to change a channel setting:
•See “Editing the Channel Name” on Page 91
•See “Editing the Talk Group ID (Trunked Channels Only)” on Page 94
•See “Setting Channel Lockout” on Page 96
•See “Deleting Channels” on Page 97
•See “Copying/Pasting Channels” on Page 97
To program another channel within the same group, press Menu , then repeat the above. To create another channel group and enter more channels, press Menu three times, then proceed from “Entering/Editing Motorola Channel Groups” on Page 72.
Programming EDACS Systems
Menu
Program System
New System
EDCS
Confirm? Yes=“E”/ No=“.”
Next, rotate the scroll control to select the type of EDACS system you want to program, then briefly press the scroll control to select it.
•WIDE - Use for wideband EDACS systems
•NARROW - Use for narrowband EDACS systems
•SCAT - Use for EDACS SCAT (Single Channel Autonomous Trunking)
Confirm? Yes=“E”/ No=“.”
Programming Radio Systems
73
