Programming Conventional Systems
Menu
Program System
New System
Conventional
Confirm? Yes=“E”/ No=“.”
The scanner creates an empty conventional system,
with a default name of System n C. n is a number that increments as you add new systems. C indicates that this is a conventional system.
Refer to the appropriate section to set
•See “Editing the System Name” on Page 80
•See “Editing the System Quick Key” on Page 81
•See “Setting System Lockout” on Page 81
•See “Setting the System Hold Time” on Page 82
•See “Setting the Channel Delay Time” on Page 82
•See “Deleting Systems” on Page 88
•See “Copying Systems” on Page 89
•See “Entering/Editing Conventional Channel Groups” on Page 67
Entering/Editing Conventional Channel Groups
To enter channels in a conventional system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Menu
Program System
Select the system
Edit Group
New Group
Programming Radio Systems
67
