
12.If you have another frequency to enter for this driver, press E then repeat from Step 5. Otherwise, press No
13.To enter another car in this race, press E then repeat from Step 3. Otherwise, press No
14.When you finish, press Scan to begin scanning the race
Another Freq for This Driver?
Yes=“E”/ No=“.”
Another Car For This race?
Yes=“E”/ No=“.”
Complete Press SCAN Key
Manually Programming Racing Systems
Menu
Program System
New System Racing
Confirm? E
The scanner creates an empty conventional system,
with a default name of System NN | R. |
NNincrements as you add new systems. R indicates that this is a racing system.
Refer to the appropriate section to set
•See “Editing the System Name” on Page 80
•See “Setting System Lockout” on Page 81
•See “Setting the System Hold Time” on Page 82
•See “Setting the Channel Delay Time” on Page 82
•See “Setting Data Skip” on Page 115
•See “Deleting Systems” on Page 88
•See “Copying Systems” on Page 89
Programming Radio Systems
63