Then connect the other end of the cables together using the null modem connector and gender changer.
Then set the scanner containing the programming you want to transfer as the master scanner, then set the other scanner as the slave scanner.
(Master scanner) Clone Master Press SCAN Key
Scan
(Slave scanner) Clone Slave Press SCAN Key
Scan
When you are ready to clone the scanner, press Scan on the slave scanner first, then on the master scanner. The master scanner checks the connection between the two scanners, then transfers its data to the slave scanner.
When the transfer is complete, Complete appears on both scanners. If the transfer did not work, Error appears on the master scanner.
On-Air Cloning
You can clone (copy) data from a PC to a BR330T scanner. This is useful if you want to quickly program 20 or more BR330T scanners at the same time.
Note:
Menu Xfer Information
On-Air Clone
•Start Cloning Start
•Set Frequency Lets you set the frequency where your scanner receives the cloning broadcast.
•Set Modulation Lets you set the cloning broadcast’s modulation type.
To clone (copy) data from a PC to the scanner, you need a transceiver, a PC that has an audio input, and a cable to connect your PC’s sound card to the
58
