Uniden BR330T owner manual Selecting Systems to Scan

Notes:

•The systems preprogrammed into the scanner are located primarily in major metropolitan areas.

•You might hear transmissions on frequencies assigned to very distant stations. This will happen if a local system also uses the same frequency.

You can scan the preprogrammed systems more efficiently by preventing the BR330T from trying to scan systems that are not in your area. To do this, refer to the quick key assignments listed in “Preprogrammed Systems” on Page 148, and enter the quick key for each distant system to turn them off.

To stop scanning a local preprogrammed system, you can:

•Lock out the system (see “Locking/Unlocking Sys- tems” on Page 45)

•Reassign the system to another quick key so you can easily enable/disable it independently of other systems (see “Editing the System Quick Key” on Page 81)

•Delete the system (see “Deleting Systems” on Page 88)

Important! You cannot restore preprogrammed systems if you delete them.

Selecting Systems to Scan

To select systems to scan, press Scan then press the quick key assigned to the system or systems you want to scan. For quick keys 0-9, press the quick key’s number. For quick keys 10-99, press then press the quick key’s 2-digit number. To stop scanning the system(s), press (if the quick key is a 2-digit quick key) then the number button or buttons again.

The Sx: (system) indicators on the display show the systems that are currently selected.

44