Uniden BR330T owner manual Setting System Frequencies, Set Frequencies

•See “Setting the End Code Operation (Motorola Systems Only)” on Page 85

•See “Setting I-Call (Motorola and EDACS Sys- tems Only)” on Page 85

•See “Setting Emergency Alert (Motorola and EDACS Systems Only)” on Page 86

•See “Setting Control-Channel Only (Motorola Sys- tems Only)” on Page 86

•See “Setting System Lockout” on Page 81

•See “Reviewing Locked Out Frequencies” on Page 111

•See “Setting System Attenuation (Trunked Sys- tems Only)” on Page 88

•See “Deleting Systems” on Page 88

•See “Copying Systems” on Page 89

•See “Setting System Frequencies” on Page 70

•See “Entering/Editing Motorola Channel Groups” on Page 72

Setting System Frequencies

Menu

Program System

Select the system

Set Frequencies

Input a system frequency, then press the scroll control.

To enter additional frequencies, press Menu , use the scroll control to select New Frequency, then repeat the above.

Note: If you select Control Channel Only mode (see “Setting Control-Channel Only (Motorola Systems Only)” on Page 86), you only need to enter the frequency(s) that can be assigned as the control channel. Most frequency lists usually indicate which of the frequencies are the control channel frequencies. Otherwise, you must enter all of the frequencies.

70