Notes:
•Turn on this setting if you are near other strong signal sources. Attenuation sometimes helps to reduce interference and desensitization that strong signals create.
•Even if ATT appears, attenuation might not work if the bar antenna is turned on and the tuned fre- quency is from 0.1 to 1.7 MHz.
•Search with Scan - sets whether the scan- ner includes the service search during scan- ning. If unlocked, the scanner first scans all selected systems, then searches the selected service searches for the selected hold time
Notes:
•You can also lock and unlock a search range by pressing Func , selecting the search range then pressing Func + L/O.
•If you select 0, the scanner searches the entire range one time.
•The default setting is 2 seconds for each search range.
•The scanner moves to the next system or search range after the hold time expires, any current transmission ends, and the channel delay time expires.
Auto Search and Store
Your scanner’s Auto Store feature lets you search for new frequencies in custom search ranges or within a service search range on a conventional system, or new talk group ID’s on a trunked system.
Note: You cannot use Auto Search and Store to select racing systems or EDACS SCAT systems.
104
