Muratec F-160 Programming regular polling, Type Comm Program/Enter, 72Fax#/Com-Options 5558743

If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

22 Press ENTER. The LCD asks if you want to turn the Copy & Fax feature on or off for this programmable one-touch number.

66:Copy&Fax: ---

Program/Enter

23	Press /PROGRAM until the mode you want appears.
24	Press ENTER.
25	The LCD now displays the next programmable one-touch key.
	If you do not want to enter or change any other key’s programming, press STOP.

Your machine returns to standby mode.

If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.

Programming regular polling

Note: You cannot program continuous polling into a programmable one-touch key. For more information on continuous polling, see page 2.30.

To program a regular polling operation into a programmable one-touch key:

1	Press /PROGRAM, C, 1, ENTER. The LCD shows an empty programmable one-
	touch number:

Select Program No. 65:No Number Stored

Note: If a programmable one-touch number other than 65 appears on the LCD, it means that you have already entered a number for 65.

Note: To erase a programmable one-touch key, see page 2.58.

2 Press the key that you want to program or change. Here, we’ve selected 72.

Select Program No. 72:No Number Stored

Note: If your previous command for this key was for a polling transmission and you want to keep this key programmed for a polling transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored command before pro- gramming the new one.

Beyond the Basics

3

4 Press ENTER. The LCD asks for the type of operation you want to program into the programmable one-touch:

72:Type: Comm. Program/Enter

	Note: If changing a previously stored command, skip to step 7.
5	Press		/PROGRAM until “Comm.” appears.
		72:	Type: Comm.
			Program/Enter
6
	Press ENTER. The LCD now shows either:
		72:Fax#/Com-Options			or	72:Fax#/Com-Options
		_				9-5558743_
7
	Use the numeric keypad to enter the number exactly as your machine should
	dial it, including whatever codes your phone system requires. The number can
	be up to 40 characters in length:
		72:Fax#/Com-Options
		9-5550696_
	Your display shows only 20 characters at a time. To view characters beyond
	those 20, press			to scroll to the left or		/PROGRAM to scroll to the right.
	Important: Do not press ENTER.
	Note: To erase characters, press CANCEL to erase to the left.
			To change just one character in the number, press to move the cur-
			sor left, or	/PROGRAM to move it right. Press CANCEL to erase it.
			Then re-enter the number correctly.
8	Next, while you can still see the fax number on the LCD, press COM-OPTIONS
	twice and then press ENTER.
9	If you want the polling to begin immediately every time you press the key,
	press ENTER and skip to step 12.

If you want to delay the polling, press COM-OPTIONS,ENTER.

2.49