
Getting started
EasyStart
EasyStart software is already installed on your Muratec fax machine. It guides you through the process of entering your machine’s settings.
Remember that the settings you make here can always be changed later. We’ll explain more in “Beyond the basics,” beginning on page 2.1.
Getting started
Determine the following before you go any further:
1 The type of dialling your telephone system requires — Choose either tone or pulse (rotary) dialling.
2 The name and fax number you want to appear on your faxes — Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page. This text lists a name and a fax number, which are called a Transmit Terminal Identifier (TTI). The TTI cannot be longer than 22 characters.
Clearing stored settings
Before using EasyStart, clear your machine’s
Important: After you use EasyStart, do not clear the memory again unless an authorised technician asks you to do so.
To clear the machine’s memory:
1 Press /PROGRAM, *, 2. The LCD now asks if you want to clear the memory:
Clear User Settings
Check Program/Enter
Note: If you don’t want to clear the memory, just press /PROGRAM.
2 If you do want to clear the memory, press ENTER.
Entering initial settings
Important: If you press STOP during EasyStart, your fax machine returns to standby mode (its normal condition). But it will keep the settings you saved by pressing ENTER as described in these instructions.
1 Press /PROGRAM, I, ENTER.
The LCD shows the current calendar/clock setting, with a cursor appearing under the first digit.
|
|
| Enter Time |
| |
|
|
|
| ’01 01/01 00:00 |
|
2 |
|
|
| ||
Use the numeric keypad to enter the correct date and time, using a YYMMDD | |||||
| format for the date and | ||||
| to set 8:30 PM on September 11, 2000, press 0 0 0 9 1 1 2 0 3 0, which results in: | ||||
|
|
|
| ||
|
|
| Enter Time |
| |
|
|
|
| ’00 09/11 20:30 |
|
|
|
|
| ||
| Note: Your fax machine automatically inserts the spaces and | ||||
|
|
|
| you have to do is enter the digits. | |
| To change a digit, press to move the cursor left, or /PROGRAM to move it | ||||
| right. Then enter the correct digit. | ||||
3 Press ENTER to save the clock setting and continue EasyStart. | |||||
4 | The LCD now asks you to enter your fax number as you want it to appear on | ||||
| other fax machines’ displays or printouts. The fax industry term for this | ||||
| number is Subscriber ID. | ||||
|
|
|
| ||
|
|
| Your Fax Number |
| |
5 |
|
|
|
|
|
|
|
| |||
Use the numeric keypad to enter the fax number. To insert a dash, as shown | |||||
| here, press DIALING OPTIONS once. The number may contain up to 20 | ||||
| characters (numbers and dashes). | ||||
|
|
|
|
|
|
|
|
| Your Fax Number |
| |
|
|
| |||
|
|
|
|
|
|
1.10